On Mon, Jan 01, 2024 at 05:04:53PM +0800, Kevin Lo wrote:

> This diff lists Quectel RM500Q as supported for umb(4).
> 
> Switching to MBIM mode is done by issuing AT commands
> (AT+QCFG="usbnet",2 and AT+CFUN=1,1) over the serial port.
> 
> umb0 at uhub0 port 5 configuration 1 interface 4 "Quectel RM500Q-AE" rev 2.10/4.14 addr 3
> 
> umb0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         index 7 priority 6 llprio 3
>         roaming disabled registration home network
>         state up cell-class LTE rssi -101dBm speed 1.1Gbps up 3.0Gbps down
>         SIM initialized PIN valid (3 attempts left)
>         subscriber-id 466xxxxxxxxxxxx ICC-id 8988xxxxxxxxxxxxxxxx
>         device RM500Q-AE IMEI 867xxxxxxxxxxxx firmware RM500QAEAAR13A02M4G
>         APN internet provider TW Mobile provider-id 46697
>         dns 61.31.1.1 61.31.233.1
>         groups: egress
>         status: active
>         inet 10.93.21.217 --> 10.93.21.218 netmask 0xfffffffc
> 
> ok?
> 
> Index: share/man/man4/umb.4
> ===================================================================
> RCS file: /cvs/src/share/man/man4/umb.4,v
> retrieving revision 1.16
> diff -u -p -u -p -r1.16 umb.4
> --- share/man/man4/umb.4	21 Feb 2023 07:47:24 -0000	1.16
> +++ share/man/man4/umb.4	1 Jan 2024 09:00:50 -0000
> @@ -56,6 +56,7 @@ The following devices should work:
>  .\" .It Huawei ME906s -- attaches but needs more work
>  .It Medion Mobile S4222 (MediaTek OEM)
>  .It Quectel EC25
> +.It Quectel RM500Q
>  .It SIMCom SIM7600
>  .It SIMCom SIM8262E-M2
>  .It Sierra Wireless EM7345

OK mglocker@