On Tue, Nov 26, 2024 at 03:29:17PM +0100, Landry Breuil wrote:
> Le Mon, Nov 25, 2024 at 07:26:25PM +0100, Walter Alejandro Iglesias a écrit :
> > On Mon, Nov 25, 2024 at 05:48:14PM +0100, Landry Breuil wrote:
> > > here's a diff (below) that does _just_ that, for a start. gives this here:
> > > 
> > > hw.sensors.upd0.percent2=25.00% (PercentLoad), OK
> > > hw.sensors.upd0.timedelta0=917.352000 secs (RunTimeToEmpty), OK
> > 
> > I get this in mine:
> > 
> >   hw.sensors.upd0.percent2=24.00% (PercentLoad), OK
> >   hw.sensors.upd0.timedelta0=1017.806400 secs (RunTimeToEmpty), OK
> 
> and do those two values match what's reported by the UPS on its LCD, if
> you have one ?

It's an Eaton 3S 550:

  https://www.eaton.com/gb/en-gb/skuPage.3S550B.html

No LCD, :(

I can try installing nut.


> 
> Landry
> 

-- 
Walter