On Mon, Nov 25, 2024 at 9:17 PM Jonathan Gray <jsg@jsg.id.au> wrote:
>
> On Wed, Nov 20, 2024 at 07:11:11AM -0700, Joel Knight wrote:
> > On Tue, Nov 19, 2024 at 10:18 PM Jonathan Gray <jsg@jsg.id.au> wrote:
> >
> > On this version of Xen, there are just the 3 devices:
> >
> > % hostctl device
> > 9pfs
> > vbd
> > vif
> >
> > dmesg with attached diff:
> >
> > bios0: vendor Xen version "4.17" date 10/02/2024
> > bios0: Xen HVM domU
> > pvbus0 at mainbus0: Xen 4.17
> > xen0 at pvbus0: features 0x112705, 64 grant table frames, event channel 3
> > xen0: failed to attach "device/9pfs/"
> > xbf0 at xen0 backend 0 channel 8: cdrom
> > xbf1 at xen0 backend 0 channel 8: disk
> > sd0 at scsibus1 targ 0 lun 0: <Xen, phy xvda 768, 0000>
> > xbf2 at xen0 backend 0 channel 9: disk
> > sd1 at scsibus2 targ 0 lun 0: <Xen, phy xvdb 832, 0000>
> > xnf0 at xen0 backend 0 channel 10: address 4e:4b:b7:f4:f4:94
> > xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x02
> > xen0: failed to attach "device/9pfs/"
>
> Ideally it would be something like
> "9pfs" at xen0 backend 0 channel 8 not configured
>
> config_found()/config_found_sm() should do that.  I don't follow why
> that doesn't happen.  Could you try and figure it out?  Is it because
> 9pfs is not a different device, but rather a property of /device/vbd/ ?
> Should xbf_match() not claim devices with the 9pfs property?

xen_attach_device() is kicking out early after xs_getprop() for
"backend". With XEN_DEBUG:

xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x02
xen0: attaching "9pfs/"
xen0: failed to identify "backend" for "device/9pfs/"

There are no units under the 9pfs device. This appears to be how
XCP-ng 8.3/Xen 4.17 presents this device since I see the same on a
FreeBSD VM.

The diff below causes xen_attach_devices() to continue after
xs_getprop()/getnum() so that config_found() is called. I'm not sure
what side effects this might have, but I see no issues on this test
VM.

xen0 at pvbus0: features 112705, idtvec 112, 64 grant table frames,
event channel 3
"9pfs" at xen0: device/9pfs/ not configured
xbf0 at xen0 backend 0 channel 8: cdrom
[...]


Index: dev/pv/xen.c
===================================================================
RCS file: /cvs/src/sys/dev/pv/xen.c,v
diff -p -u -r1.98 xen.c
--- dev/pv/xen.c        24 May 2024 10:05:55 -0000      1.98
+++ dev/pv/xen.c        26 Nov 2024 17:29:51 -0000
@@ -1364,15 +1364,14 @@ xen_attach_device(struct xen_softc *sc,
            sizeof(xa.xa_backend))) {
                DPRINTF("%s: failed to identify \"backend\" for "
                    "\"%s\"\n", sc->sc_dev.dv_xname, xa.xa_node);
-               return (EIO);
        }

        if (xs_getnum(sc, xa.xa_node, "backend-id", &res) || res > UINT16_MAX) {
                DPRINTF("%s: invalid \"backend-id\" for \"%s\"\n",
                    sc->sc_dev.dv_xname, xa.xa_node);
-               return (EIO);
        }
-       xa.xa_domid = (uint16_t)res;
+       if (res <= UINT16_MAX)
+               xa.xa_domid = (uint16_t)res;

        xdv = malloc(sizeof(struct xen_device), M_DEVBUF, M_ZERO | M_NOWAIT);
        if (xdv == NULL)
@@ -1426,7 +1425,7 @@ xen_probe_devices(struct xen_softc *sc)
                                printf("%s: failed to attach \"%s/%s\"\n",
                                    sc->sc_dev.dv_xname, path,
                                    (const char *)iovp2[j].iov_base);
-                               goto out;
+                               continue;
                        }
                }
                /* Setup a watch for every device subtree */