On Mon, Jan 06, 2025 at 03:27:07AM GMT, Kirill A. Korinsky wrote:
> tech@,
> 
> Here a quirk which is required for Honor MagicBook's touchpad to be read as
> multioutch. This touchpad needs re-power command with sleep after report
> description is read. Without waitng quite enough, almost the seconds, or
> re-power command it reads only as:
> 
>         imt0 at ihidev1ihidev1: failed fetching report
>         ims0 at ihidev1 reportid 1: 3 buttons, Z dir
> 
> but seems only on the cold boot. Otherwise with 1 seconds sleep and re-power
> command, or on warm boot, it reads as:
> 
>         imt0 at ihidev1: touchpad, 5 contacts
>         ims0 at ihidev1 reportid 1: 3 buttons, Z dir
> 
> Ok?

Tested on the T14s. I have a similar bug where I get "imt0: invalid max X/Y 0/0",
I was hoping this might fix that one too but looks like it doesn't.
It also didn't make it worse though.

ok tobhe@

> 
> Index: sys/dev/i2c/ihidev.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/i2c/ihidev.c,v
> diff -u -p -u -p -r1.35 ihidev.c
> --- sys/dev/i2c/ihidev.c	6 Jan 2025 02:13:55 -0000	1.35
> +++ sys/dev/i2c/ihidev.c	6 Jan 2025 02:18:27 -0000
> @@ -76,6 +76,17 @@ int	ihidev_maxrepid(void *buf, int len);
>  int	ihidev_print(void *aux, const char *pnp);
>  int	ihidev_submatch(struct device *parent, void *cf, void *aux);
>  
> +#define IHIDEV_QUIRK_RE_POWER_ON	0x1
> +
> +const struct ihidev_quirks {
> +	uint16_t		ihq_vid;
> +	uint16_t		ihq_pid;
> +	int			ihq_quirks;
> +} ihidev_devs[] = {
> +	/* HONOR MagicBook Art 14 Touchpad (QTEC0002) */
> +	{ 0x35cc, 0x0104, IHIDEV_QUIRK_RE_POWER_ON },
> +};
> +
>  const struct cfattach ihidev_ca = {
>  	sizeof(struct ihidev_softc),
>  	ihidev_match,
> @@ -99,6 +110,25 @@ ihidev_match(struct device *parent, void
>  	return (0);
>  }
>  
> +int
> +ihidev_quirks(struct ihidev_softc *sc)
> +{
> +	const struct ihidev_quirks	*q;
> +	uint16_t			 vid, pid;
> +	int 				 i, nent;
> +
> +	nent = nitems(ihidev_devs);
> +
> +	vid = letoh16(sc->hid_desc.wVendorID);
> +	pid = letoh16(sc->hid_desc.wProductID);
> +
> +	for (i = 0, q = ihidev_devs; i < nent; i++, q++)
> +		if (vid == q->ihq_vid && pid == q->ihq_pid)
> +			return (q->ihq_quirks);
> +
> +	return (0);
> +}
> +
>  void
>  ihidev_attach(struct device *parent, struct device *self, void *aux)
>  {
> @@ -637,6 +667,23 @@ ihidev_hid_desc_parse(struct ihidev_soft
>  		printf("%s: failed fetching HID report\n",
>  		    sc->sc_dev.dv_xname);
>  		return (1);
> +	}
> +
> +	if (sc->sc_quirks & IHIDEV_QUIRK_RE_POWER_ON) {
> +		if (ihidev_poweron(sc))
> +			return (1);
> +
> +		/*
> +		 * 7.2.8 states that a device shall not respond back
> +		 * after receiving the power on command, and must ensure
> +		 * that it transitions to power on state in less than 1
> +		 * second. The ihidev_poweron function uses a shorter
> +		 * sleep, sufficient for the ON-RESET sequence. Here,
> +		 * however, it sleeps for the full second to accommodate
> +		 * cold boot scenarios on affected devices.
> +		 */
> +
> +		ihidev_sleep(sc, 1000);
>  	}
>  
>  	return (0);
> Index: sys/dev/i2c/ihidev.h
> ===================================================================
> RCS file: /cvs/src/sys/dev/i2c/ihidev.h,v
> diff -u -p -u -p -r1.9 ihidev.h
> --- sys/dev/i2c/ihidev.h	3 Sep 2022 15:48:16 -0000	1.9
> +++ sys/dev/i2c/ihidev.h	6 Jan 2025 02:18:27 -0000
> @@ -93,6 +93,8 @@ struct ihidev_softc {
>  	int		sc_fastpoll;
>  	struct timeout	sc_timer;
>  	int		sc_dying;
> +
> +	int		sc_quirks;
>  };
>  
>  struct ihidev {
> 
> 
> -- 
> wbr, Kirill
>