Download raw body.
em0 I219-LM slow until down+up
On 2025/04/02 12:20, Stuart Henderson wrote:
> Sorry this isn't a great report but wondering if anyone else has seen
> similar, or suggestions for things to gather to try and debug if I hit
> it again.
>
> Thinkpad T14G3 intel has been up 11 days on a 21 Mar kernel
> (dmesg below).
>
> em0 was performing extremely poorly (intermittent and at most a few
> hundred KB/sec).
>
> Recovered right after ifconfig em0 down + ifconfig em0 up.
Happened again, so here's systat mbuf
IFACE RING LIVELOCKS SIZE ALIVE LWM HWM CWM
System mbufs 0 256 611 186
mcl2k 2048 0 33
mcl2k2 2112 40 63
mcl4k 4096 512 117
mcl8k 8192 0 17
mcl9k 9216 0 8
mcl12k 12288 0 13
mcl16k 16384 0 17
mcl64k 65536 0 18
lo0
iwx0
em0 2050 39 10 256 39
$ netstat -m
612 mbufs in use:
557 mbufs allocated to data
11 mbufs allocated to packet headers
44 mbufs allocated to socket names and addresses
0/264 mbuf 2048 byte clusters in use (current/peak)
41/945 mbuf 2112 byte clusters in use (current/peak)
512/936 mbuf 4096 byte clusters in use (current/peak)
0/136 mbuf 8192 byte clusters in use (current/peak)
0/112 mbuf 9216 byte clusters in use (current/peak)
0/130 mbuf 12288 byte clusters in use (current/peak)
0/136 mbuf 16384 byte clusters in use (current/peak)
0/144 mbuf 65536 byte clusters in use (current/peak)
16104/22200/524288 Kbytes allocated to network (current/peak/max)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines
0 defrag mbuf allocation
415872 prepend mbuf allocation
0 pullup mbuf allocation
0 pullup memory copy
0 pulldown mbuf allocation
0 pulldown memory copy
kstat during problem:
$ kstat em0::: | grep -v ' 0 packets'
em0:0:em-stats:0
rx crc errs: 1741 packets
rx errs: 1741 packets
rx missed: 121 packets
tx coll: 0
tx defers: 0
seq errs: 0
rx len errs: 184 packets
tx xon: 9 packets
tx xoff: 23 packets
rx good: 63681 packets
rx bcast: 1072 packets
rx mcast: 171 packets
tx good: 48887 packets
rx good: 66329376 bytes
tx good: 6536423 bytes
rx no buffers: 159 packets
rx fragments: 184 packets
rx mgmt: 235 packets
rx total: 67313230 bytes
tx total: 6538471 bytes
rx total: 65727 packets
tx total: 48919 packets
tx mcast: 17 packets
tx bcast: 6 packets
em0:0:rxq:0
packets: 8752143 packets
bytes: 4920062471 bytes
fdrops: 140 packets
enqueues: 6415375
dequeues: 6409205
em0:0:txq:0
packets: 8955873 packets
bytes: 8252577289 bytes
qdrops: 28 packets
maxqlen: 511 packets
oactive: false
oactives: 1826919
so a bunch of CRC errors listed there. No Ifail in netstat -ni though
em0 1500 <Link> 9c:2d:cd:ac:62:d0 8756125 0 8958943 28 0
No Ierrs with netstat -eni either
em0 1500 <Link> 9c:2d:cd:ac:62:d0 8758721 0 8960937 0 0
So, have swapped the cable and switchport, let's see what happens next.
> I forgot to collect kstat before down+up. Afterwards it looks like this:
>
> $ kstat em0:::
(now with '0 packets' lines removed)
> em0:0:em-stats:0
> rx crc errs: 39 packets
> rx errs: 39 packets
> tx coll: 0
> tx defers: 0
> seq errs: 0
> rx good: 6738 packets
> rx bcast: 109 packets
> rx mcast: 21 packets
> tx good: 6709 packets
> rx good: 2263663 bytes
> tx good: 810753 bytes
> rx mgmt: 34 packets
> rx total: 2273663 bytes
> tx total: 810753 bytes
> rx total: 6777 packets
> tx total: 6709 packets
> tx mcast: 17 packets
> tx bcast: 5 packets
> em0:0:rxq:0
> packets: 8695200 packets
> bytes: 4856225814 bytes
> fdrops: 140 packets
> enqueues: 6382754
> dequeues: 6376595
> em0:0:txq:0
> packets: 8913695 packets
> bytes: 8247021135 bytes
> qdrops: 28 packets
> maxqlen: 511 packets
> oactive: false
> oactives: 1826919
>
>
> OpenBSD 7.7-beta (GENERIC.MP) #51: Fri Mar 21 11:44:23 GMT 2025
> sthen@lundy.spacehopper.org:/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16814370816 (16035MB)
> avail mem = 16278204416 (15524MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.4 @ 0x8d8a3000 (81 entries)
> bios0: vendor LENOVO version "N3MET12W (1.11 )" date 02/09/2023
> bios0: LENOVO 21AJS4GY00
> efi0 at bios0: UEFI 2.7
> efi0: Lenovo rev 0x1110
> acpi0 at bios0: ACPI 6.3
> acpi0: sleep states S0ix S4 S5
> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT TPM2 HPET APIC MCFG ECDT SSDT SSDT SSDT SSDT SSDT SSDT LPIT WSMT SSDT DBGP DBG2 NHLT MSDM SSDT BATB DMAR SSDT SSDT SSDT PHAT UEFI FPDT ASF! BGRT
> acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEG2(S4) PEGP(S4) GLAN(S4) XHCI(S3) XDCI(S4) HDAS(S4) CNVW(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 19200000 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: 12th Gen Intel(R) Core(TM) i5-1245U, 1587.47 MHz, 06-9a-04, patch 00000436
> cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
> cpu0: cpuid 6 eax=df8ff7<SENSOR,ARAT> ecx=409<EFFFREQ>
> cpu0: cpuid 7.0 ebx=239c27eb<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PT,SHA> ecx=98c027ac<UMIP,PKU,WAITPKG,PKS> edx=fc1cc410<MD_CLEAR,IBT,IBRS,IBPB,STIBP,L1DF,SSBD>
> cpu0: cpuid a vers=5, gp=6, gpwidth=48, ff=3, ffwidth=48
> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
> cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
> cpu0: cpuid 80000007 edx=100<ITSC>
> cpu0: msr 10a=1488fd6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,TAA_NO,MISC_PKG_CT,ENERGY_FILT,DOITM,SBDR_SSDP_N,FBSDP_NO,PSDP_NO,RRSBA,OVERCLOCK,GDS_NO,RFDS_CLEAR>
> cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line 10-way L2 cache, 12MB 64b/line 12-way L3 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 38MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.0.2.0.1.0.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: 12th Gen Intel(R) Core(TM) i5-1245U, 1812.09 MHz, 06-9a-04, patch 00000436
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 8 (application processor)
> cpu2: 12th Gen Intel(R) Core(TM) i5-1245U, 1503.88 MHz, 06-9a-04, patch 00000436
> cpu2: smt 0, core 4, package 0
> cpu3 at mainbus0: apid 9 (application processor)
> cpu3: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.68 MHz, 06-9a-04, patch 00000436
> cpu3: smt 1, core 4, package 0
> cpu4 at mainbus0: apid 16 (application processor)
> cpu4: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.56 MHz, 06-9a-04, patch 00000436
> cpu4: 32KB 64b/line 8-way D-cache, 64KB 64b/line 8-way I-cache, 2MB 64b/line 16-way L2 cache, 12MB 64b/line 12-way L3 cache
> cpu4: smt 0, core 8, package 0
> cpu5 at mainbus0: apid 18 (application processor)
> cpu5: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu5: smt 0, core 9, package 0
> cpu6 at mainbus0: apid 20 (application processor)
> cpu6: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu6: smt 0, core 10, package 0
> cpu7 at mainbus0: apid 22 (application processor)
> cpu7: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu7: smt 0, core 11, package 0
> cpu8 at mainbus0: apid 24 (application processor)
> cpu8: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.56 MHz, 06-9a-04, patch 00000436
> cpu8: smt 0, core 12, package 0
> cpu9 at mainbus0: apid 26 (application processor)
> cpu9: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu9: smt 0, core 13, package 0
> cpu10 at mainbus0: apid 28 (application processor)
> cpu10: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu10: smt 0, core 14, package 0
> cpu11 at mainbus0: apid 30 (application processor)
> cpu11: 12th Gen Intel(R) Core(TM) i5-1245U, 1496.55 MHz, 06-9a-04, patch 00000436
> cpu11: smt 0, core 15, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xc0000000, bus 0-255
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PC00)
> acpiprt1 at acpi0: bus 2 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG2)
> acpiprt3 at acpi0: bus -1 (RP01)
> acpiprt4 at acpi0: bus -1 (RP02)
> acpiprt5 at acpi0: bus -1 (RP03)
> acpiprt6 at acpi0: bus -1 (RP04)
> acpiprt7 at acpi0: bus -1 (RP05)
> acpiprt8 at acpi0: bus -1 (RP06)
> acpiprt9 at acpi0: bus -1 (RP07)
> acpiprt10 at acpi0: bus -1 (RP08)
> acpiprt11 at acpi0: bus -1 (RP09)
> acpiprt12 at acpi0: bus -1 (RP10)
> acpiprt13 at acpi0: bus -1 (RP11)
> acpiprt14 at acpi0: bus -1 (RP12)
> acpiprt15 at acpi0: bus -1 (RP13)
> acpiprt16 at acpi0: bus -1 (RP14)
> acpiprt17 at acpi0: bus -1 (RP15)
> acpiprt18 at acpi0: bus -1 (RP16)
> acpiprt19 at acpi0: bus -1 (RP17)
> acpiprt20 at acpi0: bus -1 (RP18)
> acpiprt21 at acpi0: bus -1 (RP19)
> acpiprt22 at acpi0: bus -1 (RP20)
> acpiprt23 at acpi0: bus -1 (RP21)
> acpiprt24 at acpi0: bus -1 (RP22)
> acpiprt25 at acpi0: bus -1 (RP23)
> acpiprt26 at acpi0: bus -1 (RP24)
> acpiprt27 at acpi0: bus -1 (RP25)
> acpiprt28 at acpi0: bus -1 (RP26)
> acpiprt29 at acpi0: bus -1 (RP27)
> acpiprt30 at acpi0: bus -1 (RP28)
> acpiprt31 at acpi0: bus 32 (TRP0)
> acpiprt32 at acpi0: bus 80 (TRP2)
> acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
> acpithinkpad0 at acpi0: version 2.0
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "5B10W51865" serial 609 type LiP oem "SMP"
> "LEN0111" at acpi0 not configured
> "LEN0100" at acpi0 not configured
> "INTC1046" at acpi0 not configured
> "INTC1046" at acpi0 not configured
> "INTC1046" at acpi0 not configured
> "INTC1046" at acpi0 not configured
> "LEN0130" at acpi0 not configured
> "LEN0071" at acpi0 not configured
> "LEN030B" at acpi0 not configured
> "SYNA8018" at acpi0 not configured
> "ACPI000E" at acpi0 not configured
> pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
> acpibtn0 at acpi0: SLPB(wakeup)
> acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu8 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu9 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu10 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> acpicpu11 at acpi0: C3(200@1048 mwait.1@0x60), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> intelpmc0 at acpi0: PEPD
> state 0: 0x7f:1:2:0x00:0x0000000000000060
> counter: 0x7f:64:0:0x00:0x0000000000000632
> frequency: 0
> state 1: 0x7f:1:2:0x00:0x0000000000000060
> counter: 0x00:32:0:0x03:0x00000000fe00193c
> frequency: 8197
> "INTC1070" at acpi0 not configured
> acpibtn1 at acpi0: LID_(wakeup)
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn2 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "INTC1025" at acpi0 not configured
> "INTC1041" at acpi0 not configured
> tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001d15d1 rev 0x36
> "USBC000" at acpi0 not configured
> acpipwrres0 at acpi0: PXP_, resource for PEG0, PEGP, MINI
> acpipwrres1 at acpi0: PUBS, resource for XHCI
> acpipwrres2 at acpi0: WWPR, resource for HS02
> acpipwrres3 at acpi0: BTRT
> acpipwrres4 at acpi0: WRST
> acpipwrres5 at acpi0: PXP_, resource for RP01
> acpipwrres6 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
> acpipwrres7 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
> acpipwrres8 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2, TRP3
> acpitz0 at acpi0
> acpitz0: critical temperature is 128 degC
> acpipwrres9 at acpi0: PIN_
> acpipwrres10 at acpi0: PINP
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> acpivout1 at acpivideo0: DD2F
> cpu0: using VERW MDS workaround
> cpu0: Enhanced SpeedStep 1587 MHz: speeds: 2501, 2500, 2300, 2200, 2000, 1900, 1600, 1500, 1400, 1300, 1000, 900, 800, 700, 500, 400 MHz
> pci0 at mainbus0 bus 0
> 0:31:5: mem address conflict 0xfe010000/0x1000
> pchb0 at pci0 dev 0 function 0 "Intel Core 12G Host" rev 0x04
> inteldrm0 at pci0 dev 2 function 0 "Intel Graphics" rev 0x0c
> drm0 at inteldrm0
> inteldrm0: msi, ALDERLAKE_P, gen 12
> "Intel Core 12G DTT" rev 0x04 at pci0 dev 4 function 0 not configured
> ppb0 at pci0 dev 6 function 0 "Intel Core 12G PCIE" rev 0x04: msi
> pci1 at ppb0 bus 2
> nvme0 at pci1 dev 0 function 0 "Samsung PM9B1" rev 0x02: msix, NVMe 1.4
> nvme0: SAMSUNG MZVL4512HBLU-00BL7, firmware BL2QHXC7, serial S67VNF1T988419
> scsibus1 at nvme0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <NVMe, SAMSUNG MZVL4512, BL2Q>
> sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
> ppb1 at pci0 dev 7 function 0 "Intel Core 12G PCIE" rev 0x04: msi
> pci2 at ppb1 bus 32
> ppb2 at pci0 dev 7 function 2 "Intel Core 12G PCIE" rev 0x04: msi
> pci3 at ppb2 bus 80
> "Intel Core 12G CL" rev 0x01 at pci0 dev 10 function 0 not configured
> xhci0 at pci0 dev 13 function 0 "Intel Core 12G xHCI" rev 0x04: msi, xHCI 1.20
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> "Intel Core 12G TBT" rev 0x04 at pci0 dev 13 function 2 not configured
> "Intel Core 12G TBT" rev 0x04 at pci0 dev 13 function 3 not configured
> xhci1 at pci0 dev 20 function 0 "Intel 600 Series xHCI" rev 0x01: msi, xHCI 1.20
> usb1 at xhci1: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> "Intel 600 Series SRAM" rev 0x01 at pci0 dev 20 function 2 not configured
> iwx0 at pci0 dev 20 function 3 "Intel Wi-Fi 6 AX211" rev 0x01, msix
> dwiic0 at pci0 dev 21 function 0 "Intel 600 Series I2C" rev 0x01: apic 2 int 27
> iic0 at dwiic0
> ihidev0 at iic0 addr 0x2c irq 56, vendor 0x6cb product 0xce67, SYNA8018
> ihidev0: 15 report ids
> imt0 at ihidev0: clickpad, 5 contacts
> wsmouse0 at imt0 mux 0
> ims0 at ihidev0 reportid 2: 2 buttons
> wsmouse1 at ims0 mux 0
> hid at ihidev0 reportid 6 not configured
> hid at ihidev0 reportid 7 not configured
> hid at ihidev0 reportid 9 not configured
> hid at ihidev0 reportid 10 not configured
> hid at ihidev0 reportid 11 not configured
> hid at ihidev0 reportid 12 not configured
> hid at ihidev0 reportid 13 not configured
> hid at ihidev0 reportid 14 not configured
> hid at ihidev0 reportid 15 not configured
> "Intel 600 Series HECI" rev 0x01 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 600 Series KT" rev 0x01: ports: 16 com
> com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> pcib0 at pci0 dev 31 function 0 "Intel 600 Series eSPI" rev 0x01
> azalia0 at pci0 dev 31 function 3 "Intel 600 Series HD Audio" rev 0x01: msi
> azalia0: codecs: Realtek ALC257
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 600 Series SMBus" rev 0x01: apic 2 int 16
> iic1 at ichiic0
> "Intel 600 Series SPI" rev 0x01 at pci0 dev 31 function 5 not configured
> em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x01: msi, address 9c:2d:cd:ac:62:d0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse2 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> uhub2 at uhub0 port 4 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.20/90.81 addr 2
> umass0 at uhub2 port 3 configuration 1 interface 0 "Norelsys NS1081" rev 3.00/1.00 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> probe(umass0:1:0): Check Condition (error 0) on opcode 0x0
> probe(umass0:1:0): Check Condition (error 0) on opcode 0x0
> sd1 at scsibus2 targ 1 lun 0: <NORELSYS, 1081CS0, > removable
> probe(umass0:1:1): Check Condition (error 0) on opcode 0x0
> sd2 at scsibus2 targ 1 lun 1: <NORELSYS, 1081CS1, > removable
> ugen0 at uhub1 port 3 "Goodix Technology Co., Ltd. Goodix USB2.0 MISC" rev 2.00/1.00 addr 2
> uvideo0 at uhub1 port 4 configuration 1 interface 0 " Integrated Camera" rev 2.01/10.20 addr 3
> video0 at uvideo0
> uvideo1 at uhub1 port 4 configuration 1 interface 2 " Integrated Camera" rev 2.01/10.20 addr 3
> video1 at uvideo1
> ugen1 at uhub1 port 4 configuration 1 " Integrated Camera" rev 2.01/10.20 addr 3
> uhub3 at uhub1 port 6 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.81 addr 4
> uhidev0 at uhub3 port 2 configuration 1 interface 0 "Yubico YubiKey FIDO+CCID" rev 2.00/5.43 addr 5
> uhidev0: iclass 3/0
> fido0 at uhidev0: input=64, output=64, feature=0
> ugen2 at uhub3 port 2 configuration 1 "Yubico YubiKey FIDO+CCID" rev 2.00/5.43 addr 5
> ugen3 at uhub3 port 5 "AnkerInnovations Limited Anker USB-C Hub Device" rev 2.01/0.01 addr 6
> ugen4 at uhub1 port 10 "Intel Bluetooth" rev 2.01/0.00 addr 7
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd3 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd3: 488126MB, 512 bytes/sector, 999682111 sectors
> root on sd3a (999415434ce0cf93.a) swap on sd3b dump on sd3b
> inteldrm0: 1920x1200, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwx0: hw rev 0x370, fw 77.f92b5fed.0, pnvm ce1a5094, address 28:6b:35:44:15:3d
> drm:pid55690:intel_vblank_evade *ERROR* [drm] *ERROR* Potential atomic update failure on pipe A
> umass1 at uhub2 port 1 configuration 1 interface 0 "SanDisk Extreme 55AE" rev 3.20/30.00 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd4 at scsibus5 targ 1 lun 0: <SanDisk, Extreme 55AE, 3000>
> sd4: 953837MB, 512 bytes/sector, 1953459617 sectors
> ses0 at scsibus5 targ 1 lun 1: <SanDisk, SES Device, 3000>
> ses0: unable to read enclosure configuration
> ses0 detached
> sd4 detached
> scsibus5 detached
> umass1 detached
> umass1 at uhub1 port 7 configuration 1 interface 0 "Raspberry Pi RP2 Boot" rev 1.10/1.00 addr 8
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd4 at scsibus5 targ 1 lun 0: <RPI, RP2, 3> removable serial.2e8a0003E0C9125B0D9B
> sd4: 128MB, 512 bytes/sector, 262144 sectors
> ugen5 at uhub1 port 7 configuration 1 "Raspberry Pi RP2 Boot" rev 1.10/1.00 addr 8
> sd4 detached
> scsibus5 detached
> umass1 detached
> ugen5 detached
> umodem0 at uhub1 port 7 configuration 1 interface 0 "AAAFNRAA Central Scrutinizer" rev 2.00/1.00 addr 8
> umodem0: data interface 1, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0: usb1.0.00007.1
> ucom0 detached
> umodem0 detached
> umodem0 at uhub1 port 7 configuration 1 interface 0 "AAAFNRAA Central Scrutinizer" rev 2.00/1.00 addr 8
> umodem0: data interface 1, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0: usb1.0.00007.1
> drm:pid55690:intel_vblank_evade *ERROR* [drm] *ERROR* Potential atomic update failure on pipe A
> cannot forward src fe80:1::1afd:74ff:febb:a40c, dst 2a02:390:5c6d:5:b3a7:2a57:b936:1d74, nxt 58, rcvif 1, outif 2
> drm:pid55690:intel_vblank_evade *ERROR* [drm] *ERROR* Potential atomic update failure on pipe B
>
em0 I219-LM slow until down+up