Index | Thread | Search

From:
Marcus Glocker <marcus@nazgul.ch>
Subject:
Re: sys/uvideo: support pre UVC 1.5 devices
To:
"Kirill A. Korinsky" <kirill@korins.ky>
Cc:
tech@openbsd.org
Date:
Tue, 12 Aug 2025 23:42:04 +0200

Download raw body.

Thread
  • Jan Stary:

    sys/uvideo: support pre UVC 1.5 devices

  • On Tue, Aug 12, 2025 at 11:17:43PM +0200, Kirill A. Korinsky wrote:
    
    > On Tue, 12 Aug 2025 22:48:32 +0200,
    > Marcus Glocker <marcus@nazgul.ch> wrote:
    > > 
    > > On Tue, Aug 12, 2025 at 06:30:50PM +0200, Kirill A. Korinsky wrote:
    > > 
    > > > From antoher hand clean it up, to avoid garbage from some devices seems not
    > > > that bad idea.
    > > 
    > > Well, fine for me.  Just wanted to understand if there is a specific
    > > reason for it.  But could you please tweak it a bit:
    > > 
    > > > > > +	/* Different UVC version defines different length of a probe */
    > > 
    > > A bit more clear comment would be nice, so we still understand this
    > > when reading it in two years.  Something like:
    > > 
    > > /*
    > >  * Different UVC version defines different length of a probe;
    > >  * Make sure that the unused porition of probe_data remains zero.
    > >  */
    > > 
    > > > > > +	bzero(probe_data + actlen,
    > > > > > +	    sizeof(struct usb_video_probe_commit ) - actlen);
    > > 
    > > Can you please remove the space here?           ^
    > 
    > 
    > Thanks for tweaks.
    > 
    > Like this?
    
    Yes, thanks.  I made a type in my comment addition, see in-line.
    
    With that fixed ok mglocker@
    
     
    > Index: sys/dev/usb/uvideo.c
    > ===================================================================
    > RCS file: /home/cvs/src/sys/dev/usb/uvideo.c,v
    > diff -u -p -r1.260 uvideo.c
    > --- sys/dev/usb/uvideo.c	3 Aug 2025 20:00:11 -0000	1.260
    > +++ sys/dev/usb/uvideo.c	12 Aug 2025 21:15:53 -0000
    > @@ -2032,6 +2032,7 @@ uvideo_vs_get_probe(struct uvideo_softc 
    >  	usb_device_request_t req;
    >  	usbd_status error;
    >  	uint16_t tmp;
    > +	int actlen;
    >  	struct usb_video_probe_commit *pc;
    >  
    >  	req.bmRequestType = UVIDEO_GET_IF;
    > @@ -2044,13 +2045,21 @@ uvideo_vs_get_probe(struct uvideo_softc 
    >  
    >  	pc = (struct usb_video_probe_commit *)probe_data;
    >  
    > -	error = usbd_do_request(sc->sc_udev, &req, probe_data);
    > -	if (error) {
    > +	error = usbd_do_request_flags(sc->sc_udev, &req, probe_data,
    > +	    USBD_SHORT_XFER_OK, &actlen, USBD_DEFAULT_TIMEOUT);
    > +	if (error != USBD_NORMAL_COMPLETION) {
    >  		printf("%s: could not GET probe request: %s\n",
    >  		    DEVNAME(sc), usbd_errstr(error));
    >  		return (USBD_INVAL);
    >  	}
    >  
    > +	/*
    > +	 * Different UVC version defines different length of a probe;
    > +	 * Make sure that the unused porition of probe_data remains zero.
    
    portion				     ^
    
    > +	 */
    > +	bzero(probe_data + actlen,
    > +	    sizeof(struct usb_video_probe_commit) - actlen);
    > +
    >  	if (sc->sc_quirk &&
    >  	    sc->sc_quirk->flags & UVIDEO_FLAG_FORMAT_INDEX_IN_BMHINT &&
    >  	    UGETW(pc->bmHint) > 255) {
    > @@ -2065,7 +2074,8 @@ uvideo_vs_get_probe(struct uvideo_softc 
    >  		USETW(pc->bmHint, 1);
    >  	}
    >  
    > -	DPRINTF(1, "%s: GET probe request successfully\n", DEVNAME(sc));
    > +	DPRINTF(1, "%s: GET probe request successfully, length: %d\n",
    > +	    DEVNAME(sc), actlen);
    >  
    >  	DPRINTF(1, "bmHint=0x%02x\n", UGETW(pc->bmHint));
    >  	DPRINTF(1, "bFormatIndex=0x%02x\n", pc->bFormatIndex);
    > @@ -2081,6 +2091,26 @@ uvideo_vs_get_probe(struct uvideo_softc 
    >  	    UGETDW(pc->dwMaxVideoFrameSize));
    >  	DPRINTF(1, "dwMaxPayloadTransferSize=%d (bytes)\n",
    >  	    UGETDW(pc->dwMaxPayloadTransferSize));
    > +	DPRINTF(1, "dwClockFrequency=%d (Hz)\n",
    > +	    UGETDW(pc->dwClockFrequency));
    > +	DPRINTF(1, "bmFramingInfo=0x%02x\n", pc->bmFramingInfo);
    > +	DPRINTF(1, "bPreferedVersion=%d\n", pc->bPreferedVersion);
    > +	DPRINTF(1, "bMinVersion=%d\n", pc->bMinVersion);
    > +	DPRINTF(1, "bMaxVersion=%d\n", pc->bMaxVersion);
    > +	DPRINTF(1, "bUsage=%d\n", pc->bUsage);
    > +	DPRINTF(1, "bBitDepthLuma=%d\n", pc->bBitDepthLuma);
    > +	DPRINTF(1, "bmSettings=0x%02x\n", pc->bmSettings);
    > +	DPRINTF(1, "bMaxNumberOfRefFramesPlus1=%d\n",
    > +	    pc->bMaxNumberOfRefFramesPlus1);
    > +	DPRINTF(1, "bmRateControlModes=%d\n",
    > +	    UGETW(pc->bmRateControlModes));
    > +#ifdef UVIDEO_DEBUG
    > +	if (1 <= uvideo_debug) {
    > +		printf("bmLayoutPerStream=0x");
    > +		uvideo_hexdump(pc->bmLayoutPerStream,
    > +		    sizeof(pc->bmLayoutPerStream), 1);
    > +	}
    > +#endif
    >  
    >  	return (USBD_NORMAL_COMPLETION);
    >  }
    > Index: sys/dev/usb/uvideo.h
    > ===================================================================
    > RCS file: /home/cvs/src/sys/dev/usb/uvideo.h,v
    > diff -u -p -r1.67 uvideo.h
    > --- sys/dev/usb/uvideo.h	3 Aug 2025 20:00:11 -0000	1.67
    > +++ sys/dev/usb/uvideo.h	8 Aug 2025 12:18:43 -0000
    > @@ -275,7 +275,7 @@ struct usb_video_color_matching_descr {
    >  	uByte	bMatrixCoefficients;
    >  } __packed;
    >  
    > -/* Table 4-47: Video Probe and Commit Controls */
    > +/* Table 4-75: Video Probe and Commit Controls */
    >  struct usb_video_probe_commit {
    >  	uWord	bmHint;
    >  	uByte	bFormatIndex;
    > @@ -293,6 +293,12 @@ struct usb_video_probe_commit {
    >  	uByte	bPreferedVersion;
    >  	uByte	bMinVersion;
    >  	uByte	bMaxVersion;
    > +	uByte	bUsage;
    > +	uByte	bBitDepthLuma;
    > +	uByte	bmSettings;
    > +	uByte	bMaxNumberOfRefFramesPlus1;
    > +	uWord	bmRateControlModes;
    > +	uByte	bmLayoutPerStream[8];
    >  } __packed;
    >  
    >  /*
    > 
    
    
  • Jan Stary:

    sys/uvideo: support pre UVC 1.5 devices