re(4) supports 64-bit DMA. Tested with

re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G
(0x4c00), msi

Index: sys/dev/ic/re.c
===================================================================
RCS file: /cvs/src/sys/dev/ic/re.c,v
diff -u -p -r1.220 re.c
--- sys/dev/ic/re.c	10 May 2025 11:08:26 -0000	1.220
+++ sys/dev/ic/re.c	25 Feb 2026 12:44:27 -0000
@@ -913,7 +913,7 @@ re_attach(struct rl_softc *sc, const cha
 	if ((error = bus_dmamem_alloc(sc->sc_dmat, RL_TX_LIST_SZ(sc),
 		    RL_RING_ALIGN, 0, &sc->rl_ldata.rl_tx_listseg, 1,
 		    &sc->rl_ldata.rl_tx_listnseg, BUS_DMA_NOWAIT |
-		    BUS_DMA_ZERO)) != 0) {
+		    BUS_DMA_ZERO | BUS_DMA_64BIT)) != 0) {
 		printf("%s: can't allocate tx listseg, error = %d\n",
 		    sc->sc_dev.dv_xname, error);
 		goto fail_0;
@@ -930,7 +930,7 @@ re_attach(struct rl_softc *sc, const cha
 	}
 
 	if ((error = bus_dmamap_create(sc->sc_dmat, RL_TX_LIST_SZ(sc), 1,
-		    RL_TX_LIST_SZ(sc), 0, 0,
+		    RL_TX_LIST_SZ(sc), 0, BUS_DMA_64BIT,
 		    &sc->rl_ldata.rl_tx_list_map)) != 0) {
 		printf("%s: can't create tx list map, error = %d\n",
 		    sc->sc_dev.dv_xname, error);
@@ -949,7 +949,7 @@ re_attach(struct rl_softc *sc, const cha
 	for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
 		error = bus_dmamap_create(sc->sc_dmat,
 		    RL_JUMBO_FRAMELEN, sc->rl_ldata.rl_tx_ndescs,
-		    RL_JUMBO_FRAMELEN, 0, 0,
+		    RL_JUMBO_FRAMELEN, 0, BUS_DMA_64BIT,
 		    &sc->rl_ldata.rl_txq[i].txq_dmamap);
 		if (error) {
 			printf("%s: can't create DMA map for TX\n",
@@ -962,7 +962,7 @@ re_attach(struct rl_softc *sc, const cha
 	if ((error = bus_dmamem_alloc(sc->sc_dmat, RL_RX_DMAMEM_SZ(sc),
 		    RL_RING_ALIGN, 0, &sc->rl_ldata.rl_rx_listseg, 1,
 		    &sc->rl_ldata.rl_rx_listnseg, BUS_DMA_NOWAIT |
-		    BUS_DMA_ZERO)) != 0) {
+		    BUS_DMA_ZERO | BUS_DMA_64BIT)) != 0) {
 		printf("%s: can't allocate rx listnseg, error = %d\n",
 		    sc->sc_dev.dv_xname, error);
 		goto fail_4;
@@ -980,7 +980,7 @@ re_attach(struct rl_softc *sc, const cha
 	}
 
 	if ((error = bus_dmamap_create(sc->sc_dmat, RL_RX_DMAMEM_SZ(sc), 1,
-		    RL_RX_DMAMEM_SZ(sc), 0, 0,
+		    RL_RX_DMAMEM_SZ(sc), 0, BUS_DMA_64BIT,
 		    &sc->rl_ldata.rl_rx_list_map)) != 0) {
 		printf("%s: can't create rx list map, error = %d\n",
 		    sc->sc_dev.dv_xname, error);
@@ -999,7 +999,7 @@ re_attach(struct rl_softc *sc, const cha
 	for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
 		error = bus_dmamap_create(sc->sc_dmat,
 		    RL_FRAMELEN(sc->rl_max_mtu), 1,
-		    RL_FRAMELEN(sc->rl_max_mtu), 0, 0,
+		    RL_FRAMELEN(sc->rl_max_mtu), 0, BUS_DMA_64BIT,
 		    &sc->rl_ldata.rl_rxsoft[i].rxs_dmamap);
 		if (error) {
 			printf("%s: can't create DMA map for RX\n",