Download raw body.
fix fatal firmware error when forcing iwx to 11a/b/g mode
On 2026 Mar 09 (Mon) at 13:49:59 +0100 (+0100), Stefan Sperling wrote:
:Forcing iwx(4) into 11a/b/g mode produces a fatal firmware error with
:BZ firmware, and possibly other firmware, too. This also happens when
:I try to disable mimo with "ifconfig iwx0 nwflag nomimo".
:
:The driver does not take limitations of 11a/b/g modes into account while
:initializing Tx rate selection, which triggers some sanity checks in the
:firmware. The patch below fixes this.
:
:ok?
:
makes sense, and it follow what I understand of 802.11.
Minor nit, can we get defines for htole16(3895) and htole16(3839) ? Not
a blocker, but magic numbers gives me hives.
OK
Tested on ax211 that is switching between 11n/11ac/11g whie traveling.
:M sys/dev/pci/if_iwx.c | 24+ 10-
:
:1 file changed, 24 insertions(+), 10 deletions(-)
:
:path + /usr/src
:commit - bf3713f7dfbf19ede85da952a0d01b849aa8a252
:blob - e731cf032ef66ed7a7eab46a3669fc5d80d9e8d3
:file + sys/dev/pci/if_iwx.c
:--- sys/dev/pci/if_iwx.c
:+++ sys/dev/pci/if_iwx.c
:@@ -8483,18 +8483,25 @@ iwx_rs_init_v3(struct iwx_softc *sc, struct iwx_node *
: cfg_cmd.mode = IWX_TLC_MNG_MODE_NON_HT;
:
: cfg_cmd.sta_id = IWX_STATION_ID;
:- if (in->in_phyctxt->vht_chan_width == IEEE80211_VHTOP0_CHAN_WIDTH_80)
:+ if ((ni->ni_flags & IEEE80211_NODE_VHT) &&
:+ in->in_phyctxt->vht_chan_width == IEEE80211_VHTOP0_CHAN_WIDTH_80)
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_80MHZ;
:- else if (in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCA ||
:- in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCB)
:+ else if ((ni->ni_flags & IEEE80211_NODE_HT) &&
:+ (in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCA ||
:+ in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCB))
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_40MHZ;
: else
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_20MHZ;
:- cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK | IWX_TLC_MNG_CHAIN_B_MSK;
:+ if ((ni->ni_flags & IEEE80211_NODE_HT) && iwx_mimo_enabled(sc))
:+ cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK | IWX_TLC_MNG_CHAIN_B_MSK;
:+ else
:+ cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK;
: if (ni->ni_flags & IEEE80211_NODE_VHT)
: cfg_cmd.max_mpdu_len = htole16(3895);
:- else
:+ else if (ni->ni_flags & IEEE80211_NODE_HT)
: cfg_cmd.max_mpdu_len = htole16(3839);
:+ else
:+ cfg_cmd.max_mpdu_len = IEEE80211_MAX_LEN;
: if (ni->ni_flags & IEEE80211_NODE_HT) {
: if (ieee80211_node_supports_ht_sgi20(ni)) {
: cfg_cmd.sgi_ch_width_supp |= (1 <<
:@@ -8551,18 +8558,25 @@ iwx_rs_init_v4(struct iwx_softc *sc, struct iwx_node *
: cfg_cmd.mode = IWX_TLC_MNG_MODE_NON_HT;
:
: cfg_cmd.sta_id = IWX_STATION_ID;
:- if (in->in_phyctxt->vht_chan_width == IEEE80211_VHTOP0_CHAN_WIDTH_80)
:+ if ((ni->ni_flags & IEEE80211_NODE_VHT) &&
:+ in->in_phyctxt->vht_chan_width == IEEE80211_VHTOP0_CHAN_WIDTH_80)
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_80MHZ;
:- else if (in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCA ||
:- in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCB)
:+ else if ((ni->ni_flags & IEEE80211_NODE_HT) &&
:+ (in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCA ||
:+ in->in_phyctxt->sco == IEEE80211_HTOP0_SCO_SCB))
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_40MHZ;
: else
: cfg_cmd.max_ch_width = IWX_TLC_MNG_CH_WIDTH_20MHZ;
:- cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK | IWX_TLC_MNG_CHAIN_B_MSK;
:+ if ((ni->ni_flags & IEEE80211_NODE_HT) && iwx_mimo_enabled(sc))
:+ cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK | IWX_TLC_MNG_CHAIN_B_MSK;
:+ else
:+ cfg_cmd.chains = IWX_TLC_MNG_CHAIN_A_MSK;
: if (ni->ni_flags & IEEE80211_NODE_VHT)
: cfg_cmd.max_mpdu_len = htole16(3895);
:- else
:+ else if (ni->ni_flags & IEEE80211_NODE_HT)
: cfg_cmd.max_mpdu_len = htole16(3839);
:+ else
:+ cfg_cmd.max_mpdu_len = IEEE80211_MAX_LEN;
: if (ni->ni_flags & IEEE80211_NODE_HT) {
: if (ieee80211_node_supports_ht_sgi20(ni)) {
: cfg_cmd.sgi_ch_width_supp |= (1 <<
:
--
To a Real Woman, every ejaculation is premature.
fix fatal firmware error when forcing iwx to 11a/b/g mode