On Thu, Mar 26, 2026 at 11:39:28PM +0400, Hayk Martirosyan wrote:
> Hi Jonathan,
> 
> On Sun, Mar 22, 2026 at 3:50 PM Jonathan Matthew <jonathan@d14n.org> wrote:
> > ...
> > With this I can get pcie and the second nic on a Radxa E20C working
> > with u-boot 2026.04rc4 and some device tree bits pulled from linux.
> 
> Could you please share the changes you applied to u-boot 2026.04-rc4?
> 
> I've already tried two approaches.
> 
> The first one is based on the next u-boot branch and is described here:
> https://marc.info/?l=openbsd-arm&m=177229733717285&w=2
> In this case, I get the following error message from u-boot after a warm
> reboot:
> 
> pcie_dw_rockchip pcie@fe000000: PCIe-0 Link Fail
> 
> The second approach is based on the v2026.04-rc4 u-boot tag with
> changes in only two files taken from Linux (see below). In this case,
> u-boot indeed doesn't touch PCIe, but I get the following error in
> dmesg after a warm reboot:
> 
> dwpcie0: can't initialize hardware

Weird.  My devicetree should be the same as yours, and it works for me.
I've attached my in-progress u-boot-rk3528 port, which has a few other changes
in it to make things work the same way as other rockchip SoCs.

> 
> diff --git a/dts/upstream/src/arm64/rockchip/rk3528-radxa-e20c.dts
> b/dts/upstream/src/arm64/rockchip/rk3528-radxa-e20c.dts
> index 12eec2c1db2..b3245275615 100644
> --- a/dts/upstream/src/arm64/rockchip/rk3528-radxa-e20c.dts
> +++ b/dts/upstream/src/arm64/rockchip/rk3528-radxa-e20c.dts
> @@ -171,6 +171,10 @@
>   };
>  };
> 
> +&combphy {
> + status = "okay";
> +};
> +
>  &cpu0 {
>   cpu-supply = <&vdd_arm>;
>  };
> @@ -229,6 +233,14 @@
>   };
>  };
> 
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pciem1_pins>;
> + reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc_3v3>;
> + status = "okay";
> +};
> +
>  &pinctrl {
>   ethernet {
>   gmac1_rstn_l: gmac1-rstn-l {
> diff --git a/dts/upstream/src/arm64/rockchip/rk3528.dtsi
> b/dts/upstream/src/arm64/rockchip/rk3528.dtsi
> index d5f8f7b9bf0..d402f282881 100644
> --- a/dts/upstream/src/arm64/rockchip/rk3528.dtsi
> +++ b/dts/upstream/src/arm64/rockchip/rk3528.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/clock/rockchip,rk3528-cru.h>
>  #include <dt-bindings/power/rockchip,rk3528-power.h>
> @@ -278,10 +279,63 @@
> 
>   soc {
>   compatible = "simple-bus";
> - ranges = <0x0 0xfe000000 0x0 0xfe000000 0x0 0x2000000>;
> + ranges = <0x0 0xfc000000 0x0 0xfc000000 0x0 0x44000000>;
>   #address-cells = <2>;
>   #size-cells = <2>;
> 
> + pcie: pcie@fe000000 {
> + compatible = "rockchip,rk3528-pcie",
> +     "rockchip,rk3568-pcie";
> + reg = <0x0 0xfe000000 0x0 0x400000>,
> +      <0x0 0xfe4f0000 0x0 0x010000>,
> +      <0x0 0xfc000000 0x0 0x100000>;
> + reg-names = "dbi", "apb", "config";
> + bus-range = <0x0 0xff>;
> + clocks = <&cru ACLK_PCIE>, <&cru HCLK_PCIE_SLV>,
> + <&cru HCLK_PCIE_DBI>, <&cru PCLK_PCIE>,
> + <&cru CLK_PCIE_AUX>;
> + clock-names = "aclk_mst", "aclk_slv",
> +      "aclk_dbi", "pclk",
> +      "aux";
> + device_type = "pci";
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> +     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> +     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> +     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> +     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> +     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "sys", "pmc", "msg", "legacy", "err",
> +  "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie_intc 0>,
> + <0 0 0 2 &pcie_intc 1>,
> + <0 0 0 3 &pcie_intc 2>,
> + <0 0 0 4 &pcie_intc 3>;
> + linux,pci-domain = <0>;
> + max-link-speed = <2>;
> + num-lanes = <1>;
> + phys = <&combphy PHY_TYPE_PCIE>;
> + phy-names = "pcie-phy";
> + power-domains = <&power RK3528_PD_VPU>;
> + ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x00100000>,
> + <0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x01e00000>,
> + <0x03000000 0x1 0x00000000 0x1 0x00000000 0x0 0x40000000>;
> + resets = <&cru SRST_PCIE_POWER_UP>, <&cru SRST_P_PCIE>;
> + reset-names = "pwr", "pipe";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + status = "disabled";
> +
> + pcie_intc: legacy-interrupt-controller {
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + };
> + };
> +
>   gic: interrupt-controller@fed01000 {
>   compatible = "arm,gic-400";
>   reg = <0x0 0xfed01000 0 0x1000>,

• u-boot-rk3528.tar.gz (6K)