On 2026 Mar 29 (Sun) at 22:20:51 +0200 (+0200), Mark Kettenis wrote:
:> Date: Sun, 29 Mar 2026 21:23:36 +0200
:> From: Kirill A. Korinsky <kirill@korins.ky>
:> 
:> tech@,
:> 
:> I'd like to share some work which I pocking around with attempt to move
:> forward with qwz driver.
:> 
:> I've attached 3 diffs where:
:> 
:> 1. fixed a copy and typo in DTS for my Honor machine;
:> 2. updated qwz firmware to the last version;
:> 3. a bit of work in qwz.
:> 
:> Right now, after boot qwz reads like this:
:> 
:> qwz0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
:>         lladdr 3c:0a:f3:d3:55:c5
:>         index 1 priority 4 llprio 3
:>         groups: wlan
:>         media: IEEE802.11 autoselect
:>         status: no network
:>         ieee80211: nwid ""
:> 
:> and attempt to up an interface leads to firmware crash.
:> 
:> Scope of qwz work:
:> 1. Fixed a crash on my machine which was suggested as:
:> https://marc.info/?l=openbsd-tech&m=177410294328488&w=2
:> 2. Implemented world reg domain like ath12k
:> 3. Fully filled flags and follow ath12k logic with peer-metadata
:> 4. Increased RDDM size and synced timeouts with ath12k
:> 
:> This work was like read how ath12k works, and figure out what we do the
:> wrong way. Right now qwz works more or less the same way, and I run out of
:> ideas why it crashing. Any suggestion and ideas are welcome.
:> 
:> Also, I'd like to commit all three diffs, because it safe and qwz is
:> disabled anyway. Anyone willing to OK it?
:
:The two ports diffs are ok kettenis@ (but try to get an ok from ports
:person as well for the ports mechanics).
:

ports bits, OK


:I'll try to have a look at the other diff soon.
:
:> [2:text/plain Show Save:qwz.wrk.diff (13kB)]
:> 
:> 
:> [3:text/plain Show Save:qwz-firmware.diff (1kB)]
:> 
:> 
:> [4:text/plain Show Save:arm64-qcom-dtb.diff (2kB)]
:> 
:

-- 
If God had not given us sticky tape,
it would have been necessary to invent it.