On Sat, 02 May 2026 11:16:13 +0200,
Chris Narkiewicz <hello@ezaquarii.com> wrote:
> 
> On Mon, Apr 06, 2026 at 11:33:21AM +0200, Kirill A. Korinsky wrote:
> > Here I changed parser to create a dedicated listener for each discovered
> > and confiugred on a local inerface address.
> 
> Update to /etc/examples/relayd.conf would be nice touch.
> 

What is actually good sugestion. I not sure how to make it, but the most
natural way is something like that:

Index: etc/examples/relayd.conf
===================================================================
RCS file: /home/cvs/src/etc/examples/relayd.conf,v
diff -u -p -r1.6 relayd.conf
--- etc/examples/relayd.conf	29 Oct 2023 11:27:11 -0000	1.6
+++ etc/examples/relayd.conf	2 May 2026 11:41:39 -0000
@@ -2,7 +2,6 @@
 #
 # Macros
 #
-ext_addr="192.168.1.1"
 webhost1="10.0.0.1"
 webhost2="10.0.0.2"
 sshhost1="10.0.0.3"
@@ -24,7 +23,7 @@ table <fallback> { 127.0.0.1 }
 # Services will be mapped to a rdr rule.
 #
 redirect www {
-	listen on $ext_addr port http interface trunk0
+	listen on egress port http
 
 	# tag every packet that goes thru the rdr rule with RELAYD
 	pftag RELAYD
@@ -51,7 +50,7 @@ http protocol https {
 
 relay wwwtls {
 	# Run as a TLS accelerator
-	listen on $ext_addr port 443 tls
+	listen on egress port https tls
 	protocol https
 
 	# Forward to hosts in the webhosts table using a src/dst hash
@@ -69,7 +68,7 @@ protocol sshtcp {
 
 relay sshgw {
 	# Run as a simple TCP relay
-	listen on $ext_addr port 2222
+	listen on egress port 2222
 	protocol sshtcp
 
 	# Forward to the shared carp(4) address of an internal gateway


-- 
wbr, Kirill