It's a complete laptop with the RK3588 chip.
https://mntre.com/

I had the issue countless times.

On 7/15/26 16:05, pasta wrote:
> out of curiosity, what board or other special stuff are you using?
> i've probably rebooted always my rk3588 (rock5b) more than a thousand
> times and never seen the message you are talking about
>
> On Wed, Jul 15, 2026 at 01:47:34PM +0000, Jan Schreiber wrote:
>> When rebooting a RK3588 more often than not I a serial output that wants
>> me to reset the board. When using following patch it does reboot
>> reliably.
>>
>> Values are found the RK3588 TRM Part 1.
>>
>> diff --git sys/dev/fdt/rkclock.c sys/dev/fdt/rkclock.c
>> index 5cf37730bbd..3237e698bb7 100644
>> --- sys/dev/fdt/rkclock.c
>> +++ sys/dev/fdt/rkclock.c
>> @@ -235,6 +235,8 @@
>>   #define RK3588_CRU_CLKSEL_CON(i)	(0x00300 + (i) * 4)
>>   #define RK3588_CRU_GATE_CON(i)		(0x00800 + (i) * 4)
>>   #define RK3588_CRU_SOFTRST_CON(i)	(0x00a00 + (i) * 4)
>> +#define RK3588_CRU_GLB_SRST_FST		0x00c08
>> +#define  RK3588_GLB_SRST_FST_VAL		0xfdb9
>>
>>   #define RK3588_PHPTOPCRU_PPLL_CON(i)	(0x08200 + (i) * 4)
>>   #define RK3588_PHPTOPCRU_SOFTRST_CON(i)	(0x08a00 + (i) * 4)
>> @@ -4987,11 +4989,28 @@ const uint32_t rk3588_gates[78] = {
>>   	[66] = 0x00000004,
>>   };
>>
>> +extern void (*cpuresetfn)(void);
>> +struct rkclock_softc *rk3588_cru_sc;
>> +
>> +void
>> +rk3588_cpureset(void)
>> +{
>> +	struct rkclock_softc *sc = rk3588_cru_sc;
>> +
>> +	if (sc != NULL)
>> +		HWRITE4(sc, RK3588_CRU_GLB_SRST_FST, RK3588_GLB_SRST_FST_VAL);
>> +	for (;;)
>> +		continue;
>> +}
>> +
>>   void
>>   rk3588_init(struct rkclock_softc *sc)
>>   {
>>   	int i;
>>
>> +	rk3588_cru_sc = sc;
>> +	cpuresetfn = rk3588_cpureset;
>> +
>>   	/* The code below assumes all clocks are enabled.  Check this!. */
>>   	for (i = 0; i < nitems(rk3588_gates); i++) {
>>   		if (HREAD4(sc, RK3588_CRU_GATE_CON(i)) != rk3588_gates[i]) {
>>