Download raw body.
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed
On Fri, 06 Nov 2026 14:20:28 +0100, Jeremie Courreges-Anglas <jca@wxcvbn.org> wrote: > > On Fri, Nov 06, 2026 at 02:06:26PM +0100, Kirill A. Korinsky wrote: > > On Fri, 06 Nov 2026 13:54:12 +0100, > > Peter Hessler <phessler@theapt.org> wrote: > > > > > > On 2026 Nov 06 (Fri) at 11:54:32 +0100 (+0100), Kirill A. Korinsky wrote: > > > :tech@, > > > : > > > :I'm reading xhci and nearby to understand why ure is capped to ~1.5 Gbit and > > > :so far I think I had spolied one missed case in xhci. > > Does it help ure(4) speed? > Nope, it does not. So, here somethign else. > > > :Section 6.2.3.4 of eXtensible Host Controller Interface for Universal Serial > > > :Bus states that for for Enhanced SuperSpeed endpoints maxBurts for all > > > :endpoints should be setup into bMaxBurst. At least I read it this way. See > > > :page 455 here: > > > :https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf > > > : > > > :Am I wrong? > > > : > > > > > > Reading the spec it says all endpoints (transfer types), so I think the > > > check should simply be > > > "if (esscd)" > > > > > > Or if you want to specifically exclude control endpoints, then use > > > "if (esscd && xfertype != UE_CONTROL)" > > > > > > > Thanks for suggestion. > > > > Yes, I think if esscd is that is actually written in the spec. > > As discussed in the hackroom the spec also pretends the value ought to > be between 0 and 15. I'm not sure we should try to cap it at 16 or > keep the code as is. > > Diff LGTM but untested. > Yes, I think this is the right way because bMaxBurst is uByte Index: sys/dev/usb/xhci.c =================================================================== RCS file: /home/cvs/src/sys/dev/usb/xhci.c,v diff -u -p -r1.136 xhci.c --- sys/dev/usb/xhci.c 1 Mar 2025 14:43:03 -0000 1.136 +++ sys/dev/usb/xhci.c 6 Nov 2026 13:22:01 -0000 @@ -1455,9 +1455,14 @@ xhci_pipe_maxburst(struct usbd_pipe *pip maxb = UE_GET_TRANS(mps); break; case USB_SPEED_SUPER: - if (esscd && - (xfertype == UE_ISOCHRONOUS || xfertype == UE_INTERRUPT)) + /* + * Section 6.2.3.4 xHCI requires to use bMaxBurst for + * all endpoints for Enhanced SuperSpeed; + * and section 9.6.7 USB 3.0 keeps bMaxBurst between 0 15 + * */ + if (esscd && esscd->bMaxBurst < 16) maxb = esscd->bMaxBurst; + break; default: break; } -- wbr, Kirill
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed
sys/xhci: avoid clear to zero maxBurst for Enhanced SuperSpeed