From: Hrvoje Popovski <hrvoje@srce.hr>
Subject: Re: problem with gateway with snapshot #1660: Mon Feb 5 12:31:47 MST 2024
To: tech@openbsd.org
Date: Tue, 6 Feb 2024 00:24:33 +0100

On 6.2.2024. 0:15, Hrvoje Popovski wrote:
> On 5.2.2024. 23:56, Hrvoje Popovski wrote:
>> Hi all,
>>
>> with latest snapshot my firewall can't ping it's gateway and default
>> route isn't working. I see default route with netstat -rnf inet but
>> firewall
>>
>> Destination        Gateway            Flags   Refs      Use   Mtu  Prio
>> Iface
>> default            10.198.155.233    GS         0      209     -     8 em0
>>
> 
> 
> if I remove 10.198.155.233 as gateway than I can ping it.
> 
> bcbnfw1# ping 10.198.155.233
> PING 10.198.155.233 (10.198.155.233): 56 data bytes
> 64 bytes from 10.198.155.233: icmp_seq=0 ttl=255 time=0.874 ms
> 64 bytes from 10.198.155.233: icmp_seq=1 ttl=255 time=0.220 ms
> 
> 
> arp
> 10.198.155.233                      00:1f:26:3d:d4:00     em0 19m39s
> 

Sorry for spamming list. I was in panic mode.

With latest snapshot gateway doesn't work after reboot. After removing
gateway, doing sh netstart and adding that same gateway firewall is
working as it should.