From: Kevin Lo Subject: riscv64 GENERIC & RAMDISK: enable dwxe(4) To: tech@openbsd.org Date: Sun, 3 Mar 2024 11:47:35 +0800 Hi, dwxe(4) works on my Nezha board, I'd like to enable it. ok? Index: sys/arch/riscv64/conf/GENERIC =================================================================== RCS file: /cvs/src/sys/arch/riscv64/conf/GENERIC,v retrieving revision 1.49 diff -u -p -u -p -r1.49 GENERIC --- sys/arch/riscv64/conf/GENERIC 2 Feb 2024 12:09:18 -0000 1.49 +++ sys/arch/riscv64/conf/GENERIC 3 Mar 2024 01:56:19 -0000 @@ -101,6 +101,7 @@ ehci* at fdt? cad* at fdt? dwge* at fdt? dwqe* at fdt? +dwxe* at fdt? dwiic* at fdt? iic* at dwiic? dwmmc* at fdt? Index: sys/arch/riscv64/conf/RAMDISK =================================================================== RCS file: /cvs/src/sys/arch/riscv64/conf/RAMDISK,v retrieving revision 1.42 diff -u -p -u -p -r1.42 RAMDISK --- sys/arch/riscv64/conf/RAMDISK 2 Feb 2024 12:09:18 -0000 1.42 +++ sys/arch/riscv64/conf/RAMDISK 3 Mar 2024 01:56:19 -0000 @@ -91,6 +91,7 @@ ehci* at fdt? cad* at fdt? dwge* at fdt? dwqe* at fdt? +dwxe* at fdt? dwmmc* at fdt? sdmmc* at dwmmc? OpenBSD 7.5 (GENERIC.MP) #0: Sun Mar 3 00:13:01 CST 2024 root@nezha.kevlo.org:/usr/src/sys/arch/riscv64/compile/GENERIC.MP real mem = 1073741824 (1024MB) avail mem = 1008459776 (961MB) SBI: OpenSBI v1.2, SBI Specification Version 1.0 random: good seed from bootblocks mainbus0 at root: Allwinner D1 Nezha cpu0 at mainbus0: T-Head arch 0 imp 0 rv64imafdc intc0 at cpu0 cpu0: 32KB 64b/line 128-way L1 I-cache, 32KB 64b/line 256-way L1 D-cache "fit-images" at mainbus0 not configured "dcxo-clk" at mainbus0 not configured simplebus0 at mainbus0: "soc" sxipio0 at simplebus0: 88 pins sxiccmu0 at simplebus0 plic0 at simplebus0 sxitimer0 at simplebus0: 24000 kHz sxidog0 at simplebus0 com0 at simplebus0: dw16550 com0: console com1 at simplebus0: dw16550 "i2c" at simplebus0 not configured "syscon" at simplebus0 not configured "dma-controller" at simplebus0 not configured "efuse" at simplebus0 not configured "crypto" at simplebus0 not configured "dram-controller" at simplebus0 not configured sximmc0 at simplebus0 sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma sximmc1 at simplebus0 sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma "usb" at simplebus0 not configured "phy" at simplebus0 not configured ehci0 at simplebus0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci0 at simplebus0: version 1.0 ehci1 at simplebus0 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at simplebus0: version 1.0 dwxe0 at simplebus0sxiccmu_d1_get_frequency: 0x0000004d : address f6:eb:eb:fa:46:28 sxiccmu_ccu_enable: 0x0000004d sxiccmu_ccu_reset: 0x0000001e rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 6 "clock-controller" at simplebus0 not configured "mixer" at simplebus0 not configured "mixer" at simplebus0 not configured "phy" at simplebus0 not configured "tcon-top" at simplebus0 not configured "lcd-controller" at simplebus0 not configured "lcd-controller" at simplebus0 not configured "power-controller" at simplebus0 not configured "clock-controller" at simplebus0 not configured sxirtc0 at simplebus0 sxidog1 at simplebus0 sxidog2 at simplebus0 gpio0 at sxipio0: 32 pins gpio1 at sxipio0: 32 pins gpio2 at sxipio0: 32 pins gpio3 at sxipio0: 32 pins gpio4 at sxipio0: 32 pins gpio5 at sxipio0: 32 pins gpio6 at sxipio0: 32 pins usb2 at ohci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 "opp-table-cpu" at mainbus0 not configured "pmu" at mainbus0 not configured "vcc" at mainbus0 not configured "vcc-3v3" at mainbus0 not configured "usbvbus" at mainbus0 not configured "vdd-cpu" at mainbus0 not configured "wifi-pwrseq" at mainbus0 not configured "binman" at mainbus0 not configured sdmmc1: can't enable card umass0 at uhub1 port 1 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 2.10/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: removable serial.078155838107a728426f sd0: 58680MB, 512 bytes/sector, 120176640 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (22131e942e6f618e.a) swap on sd0b dump on sd0b sxiccmu_d1_set_frequency: 0x00000084 cpu0: clock not implemented