From: Maurice Janssen <maurice@z74.net>
Subject: adding support for Meinberg PCI510 receiver card
To: tech@openbsd.org
Date: Fri, 22 Mar 2024 22:30:38 +0100

Hi,

The following diff adds support for the Meinberg PCI510 card.
With this diff, the card is recognized and functions as expected:

mbg0 at pci0 dev 14 function 0 "Meinberg Funkuhren PCI510" rev 0x00: synchronized

$ ntpctl -s S
sensor
   wt gd st  next  poll          offset  correction
mbg0  DCFa
 *  1  1  0   13s   15s         0.385ms     2.500ms

Would it be possible to add this to the tree?

Thanks and best regards,
Maurice Janssen



Index: man4/mbg.4
===================================================================
RCS file: /cvs/src/share/man/man4/mbg.4,v
retrieving revision 1.15
diff -u -p -u -p -r1.15 mbg.4
--- man4/mbg.4	25 Sep 2023 15:39:12 -0000	1.15
+++ man4/mbg.4	22 Mar 2024 21:21:13 -0000
@@ -44,6 +44,8 @@ Currently, the following cards are suppo
 5V DCF77 time signal station receiver card
 .It PCI509
 5V DCF77 time signal station receiver card
+.It PCI510
+3.3V/5V DCF77 time signal station receiver card
 .It PCI511
 3.3V/5V DCF77 time signal station receiver card
 .It PEX511


Index: mbg.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/mbg.c,v
retrieving revision 1.35
diff -u -p -u -p -r1.35 mbg.c
--- mbg.c	25 Sep 2023 15:38:46 -0000	1.35
+++ mbg.c	22 Mar 2024 21:26:38 -0000
@@ -159,6 +159,7 @@ const struct pci_matchid mbg_devices[] =
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_GPS170PCI },
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI32 },
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI509 },
+	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI510 },
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI511 },
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PEX511 },
 	{ PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PZF180PEX }
@@ -241,6 +242,7 @@ mbg_attach(struct device *parent, struct
 		sc->sc_read = mbg_read_amcc_s5920;
 		sensor_task_register(sc, mbg_task, 10);
 		break;
+	case PCI_PRODUCT_MEINBERG_PCI510:
 	case PCI_PRODUCT_MEINBERG_PCI511:
 	case PCI_PRODUCT_MEINBERG_PEX511:
 		sc->sc_read = mbg_read_asic;


Index: pcidevs
===================================================================
RCS file: /cvs/src/sys/dev/pci/pcidevs,v
retrieving revision 1.2068
diff -u -p -u -p -r1.2068 pcidevs
--- pcidevs	6 Mar 2024 07:01:24 -0000	1.2068
+++ pcidevs	22 Mar 2024 21:26:38 -0000
@@ -7538,6 +7538,7 @@ product MEDIATEK MT7921		0x7961	MT7921
 /* Meinberg Funkuhren */
 product MEINBERG PCI32		0x0101	PCI32
 product MEINBERG PCI509		0x0102	PCI509
+product MEINBERG PCI510		0x0103	PCI510
 product MEINBERG PCI511		0x0104	PCI511
 product MEINBERG PEX511		0x0105	PEX511
 product MEINBERG PZF180PEX	0x0106	PZF180PEX