From: Jonathan Gray <jsg@jsg.id.au>
Subject: Re: umsm(4)/umb(4) supports for Quectel EM060K
To: Kevin Lo <kevlo@kevlo.org>
Cc: tech@openbsd.org
Date: Thu, 23 May 2024 17:09:39 +1000

On Thu, May 23, 2024 at 02:55:07PM +0800, Kevin Lo wrote:
> Hi,
> 
> Attached is a diff for umsm(4)/umb(4) which enables support for Quectel EM060K.
> 
> umsm0 at uhub0 port 2 configuration 1 interface 0 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> ucom0 at umsm0: usb0.0.00002.0
> umsm1 at uhub0 port 2 configuration 1 interface 1 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> ucom1 at umsm1: usb0.0.00002.1
> umsm2 at uhub0 port 2 configuration 1 interface 2 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> ucom2 at umsm2: usb0.0.00002.2
> umsm3 at uhub0 port 2 configuration 1 interface 3 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> ucom3 at umsm3: usb0.0.00002.3
> umb0 at uhub0 port 2 configuration 1 interface 8 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> ugen0 at uhub0 port 2 configuration 1 "Quectel EM060K-GL" rev 2.00/5.04 addr 2
> 
> The Quectel EM060K is set by default to MBIM mode.
> Tested by Shawn Chiou, thanks.
> 
> ok?

ok jsg@