From: Stuart Henderson <stu@spacehopper.org>
Subject: Re: upd(4): add more sensors (load, power..)
To: David Rinehart <wdaver@cox.net>
Cc: tech@openbsd.org
Date: Fri, 22 Nov 2024 11:15:04 +0000

On 2024/11/22 00:38, David Rinehart wrote:
> On Thu, 2024-11-21 at 17:28 +0000, Stuart Henderson wrote:
> > I'd be interested to see how RunTimeToEmpty looks with some other
> > vendors. I think so far we've had results from Cyberpower and Eaton
> > which isn't enough to tell which is the unusual one :)
> > 
> 
> 
> OpenBSD rfiles.rnet.home 7.6 GENERIC.MP#338 amd64

Thanks. I assume this is without the diff?

> uhidev0 at uhub0 port 6 configuration 1 interface 0 "American Power
> Conversion Back-UPS ES 600M1 FW:928.a9 .D USB FW:a9" rev 2.00/0.90 addr
> 2
> 
> hw.sensors.upd0.indicator0=On (BatteryPresent), OK
> hw.sensors.upd0.indicator1=Off (Charging), OK
> hw.sensors.upd0.indicator2=Off (Discharging), OK
> hw.sensors.upd0.indicator3=Off (NeedReplacement), OK
> hw.sensors.upd0.indicator4=Off (ShutdownImminent), OK
> hw.sensors.upd0.indicator5=On (ACPresent), OK
> hw.sensors.upd0.indicator6=Off (Overload), OK
> hw.sensors.upd0.percent0=100.00% (RemainingCapacity), OK
> hw.sensors.upd0.percent1=100.00% (FullChargeCapacity), OK
> hw.sensors.upd0.timedelta0=4336.000000 secs (RunTimeToEmpty), OK

~70 mins, which would be about right for this UPS if the load is
low (around 40W), does that sound correct?