From: Peter Toth Subject: Re: acpibat remaining capacity is 0 To: tech@openbsd.org Date: Wed, 12 Mar 2025 17:04:56 +0100 Some progress on this, the remaining capacity is reported fine in _SB_.BAT1.BST1 (0x558, 1368mAh) and changes to 1 by the time it returns from _SB_.BAT1._BST. Snippet from debug log: parsename: \\_SB_.BSV1 4 --==Finished evaluating method: \\_SB_.BAT1.BST1 T ===== Stack \\_SB_.BAT1.BST1:Method Local0: 0xffff8000022b7c88 cnt:01 stk:60 integer: 0 Local1: 0xffff8000022b7208 cnt:01 stk:61 integer: 1 Local3: 0xffff8000022b7408 cnt:01 stk:63 integer: 558 <-- remaining Local4: 0xffff80000232f708 cnt:01 stk:64 integer: 0 parsename: \\_SB_.BSV1 4 --==Finished evaluating method: \\_SB_.BAT1._BST t 0xffff80000232ff08 cnt:01 stk:00 package: 04 0xffff80000232f108 cnt:01 stk:00 integer: 1 0xffff80000232fc08 cnt:01 stk:00 integer: 16f 0xffff80000232f388 cnt:01 stk:00 integer: 1 <-- remaining 0xffff8000022ec608 cnt:01 stk:00 integer: 2d2d ===== Stack \\_SB_.BAT1._BST:Method acpiac_notify: 80 acpiac0 EVALNODE: \\_SB_.AC__._PSR 123848 I was able to get the battery remaining capacity with a test workaround overriding in acpibat.c after some trial and error with EC offsets. This testing only patch is working: Index: src/sys/dev/acpi/acpibat.c =================================================================== RCS file: /cvs/src/sys/dev/acpi/acpibat.c,v diff -u -p -u -r1.72 acpibat.c --- src/sys/dev/acpi/acpibat.c 5 Aug 2024 18:37:29 -0000 1.72 +++ src/sys/dev/acpi/acpibat.c 12 Mar 2025 15:39:38 -0000 @@ -458,6 +458,8 @@ acpibat_getbst(struct acpibat_softc *sc) { struct aml_value res; int rv = EINVAL; + int64_t bst_capacity; + uint16_t ec_capacity; if (!sc->sc_bat_present) { memset(&sc->sc_bst, 0, sizeof(sc->sc_bst)); @@ -475,9 +477,29 @@ acpibat_getbst(struct acpibat_softc *sc) goto out; } +bst_capacity = 0; +if (bst_capacity >= 0 && bst_capacity < 10 && sc->sc_acpi->sc_ec != NULL) { + ec_capacity = 0; + if (sc->sc_dev.dv_unit == 0) { + acpiec_read(sc->sc_acpi->sc_ec, 0x0A, 2, (u_char *)&ec_capacity); + if (ec_capacity != 0 && ec_capacity != 0xFFFF) { + bst_capacity = ec_capacity; + } + } else if (sc->sc_dev.dv_unit == 1) { + acpiec_read(sc->sc_acpi->sc_ec, 0x2A, 2, (u_char *)&ec_capacity); + if (ec_capacity != 0 && ec_capacity != 0xFFFF) { + bst_capacity = ec_capacity; + } + } + if (ec_capacity == 0 || ec_capacity == 0xFFFF) { + printf("%s: EC read invalid (capacity = %u), using _BST capacity %lld mAh\n", + DEVNAME(sc), ec_capacity, bst_capacity); + } +} sc->sc_bst.bst_state = aml_val2int(res.v_package[0]); sc->sc_bst.bst_rate = aml_val2int(res.v_package[1]); - sc->sc_bst.bst_capacity = aml_val2int(res.v_package[2]); + //sc->sc_bst.bst_capacity = aml_val2int(res.v_package[2]); + sc->sc_bst.bst_capacity = bst_capacity; sc->sc_bst.bst_voltage = aml_val2int(res.v_package[3]); dnprintf(60, "state: %u rate: %u cap: %u volt: %u ", sysctl is showing correct values now: hw.sensors.acpibat0.volt0=11.10 VDC (voltage) hw.sensors.acpibat0.volt1=12.50 VDC (current voltage) hw.sensors.acpibat0.current0=0.00 A (rate) hw.sensors.acpibat0.amphour0=2.04 Ah (last full capacity) hw.sensors.acpibat0.amphour1=0.00 Ah (warning capacity) hw.sensors.acpibat0.amphour2=0.00 Ah (low capacity) hw.sensors.acpibat0.amphour3=2.02 Ah (remaining capacity), OK hw.sensors.acpibat0.amphour4=2.10 Ah (design capacity) hw.sensors.acpibat0.raw0=1 (battery discharging), OK hw.sensors.acpibat1.volt0=11.10 VDC (voltage) hw.sensors.acpibat1.volt1=12.48 VDC (current voltage) hw.sensors.acpibat1.current0=0.00 A (rate) hw.sensors.acpibat1.amphour0=2.00 Ah (last full capacity) hw.sensors.acpibat1.amphour1=0.00 Ah (warning capacity) hw.sensors.acpibat1.amphour2=0.00 Ah (low capacity) hw.sensors.acpibat1.amphour3=1.98 Ah (remaining capacity), OK hw.sensors.acpibat1.amphour4=2.10 Ah (design capacity) hw.sensors.acpibat1.raw0=1 (battery discharging), OK And apm is also correctly calculating charging and remaining times. Also tested some changes in dsdt.c, aml_parse to see where or how the value is changed. This yielded nothing new, same info as the debug log. On Tue, Feb 25, 2025 at 9:08 AM Peter Toth wrote: > > Performed a bit more testing with ACPI_DEBUG enabled and that produced > the same result for _BST method, remaining capacity returns 1 (output > below). > The other _BST fields are working as expected and refreshing values > correctly. Checked sys/dev/acpi/dsdt.c and the ACPI spec for the > battery state method and all those values are parsed through the same > functions and should be the same type according the spec: > > Package { > Battery State // Integer (DWORD) > Battery Present Rate // Integer (DWORD) > Battery Remaining Capacity // Integer (DWORD) > Battery Present Voltage // Integer (DWORD) > } > > ACPI_DEBUG: > --==Finished evaluating method: \\_SB_.BAT0._BST t > 0xffff800002212888 cnt:01 stk:00 package: 04 > 0xffff800002216f08 cnt:01 stk:00 integer: 1 > 0xffff800002212788 cnt:01 stk:00 integer: 1ac > 0xffff800002214888 cnt:01 stk:00 integer: 1 <--- remaining capacity > 0xffff800002213788 cnt:01 stk:00 integer: 2d1d > ===== Stack \\_SB_.BAT0._BST:Method > > I will test a bit more as time permits. > > PT > > On Fri, Feb 21, 2025 at 7:24 PM Peter Toth wrote: > > > > Hi all, > > > > Tested a couple of Getac laptops recently with latest amd64 snapshots. > > Both have dual batteries attached to acpibat(4) and both show 0 > > remaining battery capacity. > > Apart from that most other battery properties are OK and sysctl reports: > > hw.sensors.acpibat0.volt0=11.10 VDC (voltage) > > hw.sensors.acpibat0.volt1=11.63 VDC (current voltage) > > hw.sensors.acpibat0.current0=0.39 A (rate) > > hw.sensors.acpibat0.amphour0=2.01 Ah (last full capacity) > > hw.sensors.acpibat0.amphour1=0.00 Ah (warning capacity) > > hw.sensors.acpibat0.amphour2=0.00 Ah (low capacity) > > hw.sensors.acpibat0.amphour3=0.00 Ah (remaining capacity), OK > > hw.sensors.acpibat0.amphour4=2.10 Ah (design capacity) > > hw.sensors.acpibat0.raw0=1 (battery discharging), OK > > hw.sensors.acpibat1.volt0=11.10 VDC (voltage) > > hw.sensors.acpibat1.volt1=11.63 VDC (current voltage) > > hw.sensors.acpibat1.current0=0.40 A (rate) > > hw.sensors.acpibat1.amphour0=2.04 Ah (last full capacity) > > hw.sensors.acpibat1.amphour1=0.00 Ah (warning capacity) > > hw.sensors.acpibat1.amphour2=0.00 Ah (low capacity) > > hw.sensors.acpibat1.amphour3=0.00 Ah (remaining capacity), OK > > hw.sensors.acpibat1.amphour4=2.10 Ah (design capacity) > > hw.sensors.acpibat1.raw0=1 (battery discharging), OK > > > > Inserted a couple of printf lines in sys/dev/acpi/acpibat.c to see > > what could be happening. The battery state for capacity in > > acpibat_getbst, line sc->sc_bst.bst_capacity = > > aml_val2int(res.v_package[2]); always reports a value of "1". The > > other 3 bst properties for voltage, rate and state are correct. > > > > Perhaps the AML parsing is breaking on some unexpected DSDT _BST > > values. If anyone is interested, I've uploaded the gzipped DSDT.dsl > > to: > > https://limewire.com/d/10e22f54-79da-456b-b492-c67e5cd40f81#EQDxKXdMDt05voTVeono-cfx3tgF3MJP9RdUhiEPEKg > > > > Perhaps someone has already seen this issue before, I would appreciate > > any help or pointers. > > > > As a side note, also tested with FreeBSD live usb boot and the > > remaining capacity showed up OK (same in Linux). > > > > dmesg below: > > OpenBSD 7.6 (GENERIC.MP) #10: Fri Feb 21 17:00:04 CET 2025 > > p@b360.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 68532105216 (65357MB) > > avail mem = 66431197184 (63353MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x9a263000 (38 entries) > > bios0: vendor INSYDE Corp. version "R1.35.070520" date 05/29/2024 > > bios0: GETAC B360 > > efi0 at bios0: UEFI 2.7 > > efi0: INSYDE Corp. rev 0x1350000 > > acpi0 at bios0: ACPI 5.1 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP UEFI SSDT SSDT SSDT TPM2 MSDM LPIT WSMT SSDT > > SSDT DBGP DBG2 SSDT SSDT SSDT SSDT NHLT ECDT HPET APIC MCFG SSDT DMAR > > SSDT FPDT ASF! BGRT > > acpi0: wakeup devices UAR1(S3) GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) > > RP01(S4) RP02(S4) RP03(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) > > RP08(S4) RP09(S4) PEGP(S4) RP10(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpihpet0 at acpi0: 23999999 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1547.73 MHz, > > 06-8e-0c, patch 000000fc > > cpu0: cpuid 1 edx=bfebfbff > > ecx=77fafbbf > > cpu0: cpuid 6 eax=27f7 ecx=9 > > cpu0: cpuid 7.0 > > ebx=29c67af > > edx=bc000600 > > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > > cpu0: cpuid d.1 eax=f > > cpu0: cpuid 80000001 edx=2c100800 > > ecx=121 > > cpu0: cpuid 80000007 edx=100 > > cpu0: msr 10a=a0a0c2b > > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > > 64b/line 4-way L2 cache, 6MB 64b/line 12-way L3 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 24MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1513.41 MHz, > > 06-8e-0c, patch 000000fc > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 4 (application processor) > > cpu2: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.52 MHz, > > 06-8e-0c, patch 000000fc > > cpu2: smt 0, core 2, package 0 > > cpu3 at mainbus0: apid 6 (application processor) > > cpu3: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.52 MHz, > > 06-8e-0c, patch 000000fc > > cpu3: smt 0, core 3, package 0 > > cpu4 at mainbus0: apid 1 (application processor) > > cpu4: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.51 MHz, > > 06-8e-0c, patch 000000fc > > cpu4: smt 1, core 0, package 0 > > cpu5 at mainbus0: apid 3 (application processor) > > cpu5: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.52 MHz, > > 06-8e-0c, patch 000000fc > > cpu5: smt 1, core 1, package 0 > > cpu6 at mainbus0: apid 5 (application processor) > > cpu6: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.51 MHz, > > 06-8e-0c, patch 000000fc > > cpu6: smt 1, core 2, package 0 > > cpu7 at mainbus0: apid 7 (application processor) > > cpu7: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz, 1496.52 MHz, > > 06-8e-0c, patch 000000fc > > cpu7: smt 1, core 3, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xe0000000, bus 0-255 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (RP01) > > acpiprt2 at acpi0: bus -1 (RP02) > > acpiprt3 at acpi0: bus -1 (RP03) > > acpiprt4 at acpi0: bus -1 (RP04) > > acpiprt5 at acpi0: bus -1 (RP05) > > acpiprt6 at acpi0: bus -1 (RP06) > > acpiprt7 at acpi0: bus -1 (RP07) > > acpiprt8 at acpi0: bus 1 (RP08) > > acpiprt9 at acpi0: bus -1 (RP09) > > acpiprt10 at acpi0: bus 2 (RP10) > > acpiprt11 at acpi0: bus -1 (RP11) > > acpiprt12 at acpi0: bus -1 (RP12) > > acpiprt13 at acpi0: bus 7 (RP13) > > acpiprt14 at acpi0: bus -1 (RP14) > > acpiprt15 at acpi0: bus -1 (RP15) > > acpiprt16 at acpi0: bus -1 (RP16) > > acpiprt17 at acpi0: bus -1 (RP17) > > acpiprt18 at acpi0: bus -1 (RP18) > > acpiprt19 at acpi0: bus -1 (RP19) > > acpiprt20 at acpi0: bus -1 (RP20) > > acpiprt21 at acpi0: bus -1 (RP21) > > acpiprt22 at acpi0: bus -1 (RP22) > > acpiprt23 at acpi0: bus -1 (RP23) > > acpiprt24 at acpi0: bus -1 (RP24) > > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > > "MTC0303" at acpi0 not configured > > "PNP0A05" at acpi0 not configured > > com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > > com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo > > "PNP0A05" at acpi0 not configured > > com3 at acpi0 UAR1 addr 0x2e8/0x8 irq 5: ns16550a, 16 byte fifo > > com3: probed fifo depth: 0 bytes > > "ETD045F" at acpi0 not configured > > "MSFT9001" at acpi0 not configured > > pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 > > 0xfd6a0000/0x10000 irq 14, 320 pins > > "CUST0000" at acpi0 not configured > > "INT3515" at acpi0 not configured > > "ACPI000E" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpiac0 at acpi0: AC unit offline > > acpibat0 at acpi0: BAT0 model "Internal Battery" type Lion oem > > "Generic Charger " > > acpibat1 at acpi0: BAT1 model "Internal Battery" type Lion oem > > "Generic Charger " > > acpibtn0 at acpi0: LID0 > > "PNP0C14" at acpi0 not configured > > acpibtn1 at acpi0: SLPB > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > intelpmc0 at acpi0: PEPD > > state 0: 0x7f:1:2:0x00:0x0000000000000060 > > counter: 0x7f:64:0:0x00:0x0000000000000632 > > frequency: 0 > > state 1: 0x7f:1:2:0x00:0x0000000000000060 > > counter: 0x00:32:0:0x03:0x00000000fe00193c > > frequency: 9580 > > tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x16 > > "PNP0C14" at acpi0 not configured > > acpipwrres0 at acpi0: USBC, resource for XDCI > > acpipwrres1 at acpi0: PC05, resource for RP09 > > acpipwrres2 at acpi0: V0PR > > acpipwrres3 at acpi0: V1PR > > acpipwrres4 at acpi0: V2PR > > acpipwrres5 at acpi0: WRST > > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 > > mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpitz0 at acpi0: critical temperature is 99 degC > > acpipwrres6 at acpi0: PIN_ > > acpivideo0 at acpi0: GFX0 > > acpivout0 at acpivideo0: DD1F > > cpu0: Enhanced SpeedStep 1547 MHz: speeds: 2101, 2100, 2000, 1900, > > 1700, 1600, 1500, 1400, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 10G Host" rev 0x0c > > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x02 > > drm0 at inteldrm0 > > inteldrm0: msi, COMETLAKE, gen 9 > > pchtemp0 at pci0 dev 18 function 0 "Intel 400 Series Thermal" rev 0x00 > > "Intel 400 Series ISH" rev 0x00 at pci0 dev 19 function 0 not configured > > xhci0 at pci0 dev 20 function 0 "Intel 400 Series xHCI" rev 0x00: msi, xHCI 1.10 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 400 Series Shared SRAM" rev 0x00 at pci0 dev 20 function 2 not configured > > dwiic0 at pci0 dev 21 function 0 "Intel 400 Series I2C" rev 0x00: apic 2 int 16 > > iic0 at dwiic0 > > dwiic1 at pci0 dev 21 function 1 "Intel 400 Series I2C" rev 0x00: apic 2 int 17 > > iic1 at dwiic1 > > ihidev0 at iic1 addr 0x2a gpio 103, vendor 0xeef product 0xc002, CUST0000 > > ihidev0: 24 report ids > > ims0 at ihidev0 reportid 1: 3 buttons > > wsmouse0 at ims0 mux 0 > > hid at ihidev0 reportid 3 not configured > > hid at ihidev0 reportid 5 not configured > > hid at ihidev0 reportid 7 not configured > > ims1 at ihidev0 reportid 24: 1 button, tip > > wsmouse1 at ims1 mux 0 > > dwiic2 at pci0 dev 21 function 2 "Intel 400 Series I2C" rev 0x00: apic 2 int 18 > > iic2 at dwiic2 > > "INT3515" at iic2 addr 0x23 not configured > > "Intel 400 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured > > ahci0 at pci0 dev 23 function 0 "Intel 400 Series AHCI" rev 0x00: msi, > > AHCI 1.3.1 > > ahci0: PHY offline on port 0 > > ahci0: PHY offline on port 1 > > scsibus1 at ahci0: 32 targets > > ppb0 at pci0 dev 28 function 0 "Intel 400 Series PCIE" rev 0xf0: msi > > pci1 at ppb0 bus 1 > > iwx0 at pci1 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix > > ppb1 at pci0 dev 29 function 0 "Intel 400 Series PCIE" rev 0xf0: msi > > pci2 at ppb1 bus 2 > > ppb2 at pci0 dev 29 function 4 "Intel 400 Series PCIE" rev 0xf0: msi > > pci3 at ppb2 bus 7 > > nvme0 at pci3 dev 0 function 0 "Samsung PM9C1 NVMe" rev 0x00: msix, NVMe 2.0 > > nvme0: Samsung SSD 990 PRO 1TB, firmware 4B2QJXD7, serial S6Z2NU0X554555D > > scsibus2 at nvme0: 2 targets, initiator 0 > > sd0 at scsibus2 targ 1 lun 0: > > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors > > pcib0 at pci0 dev 31 function 0 "Intel 400 Series LPC" rev 0x00 > > azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi > > azalia0: codecs: Realtek ALC268, Intel/0x280b, using Realtek ALC268 > > audio0 at azalia0 > > ichiic0 at pci0 dev 31 function 4 "Intel 400 Series SMBus" rev 0x00: > > apic 2 int 16 > > iic3 at ichiic0 > > spdmem0 at iic3 addr 0x50: 32GB DDR4 SDRAM PC4-25600 SO-DIMM > > spdmem1 at iic3 addr 0x52: 32GB DDR4 SDRAM PC4-25600 SO-DIMM > > "Intel 400 Series SPI" rev 0x00 at pci0 dev 31 function 5 not configured > > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x00: msi, address > > 00:22:20:3e:a3:52 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse2 at pms0 mux 0 > > pms0: Elantech Touchpad, version 4, firmware 0x5e0f01 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > efifb at mainbus0 not configured > > uhub1 at uhub0 port 8 configuration 1 interface 0 "Genesys Logic > > USB2.0 Hub" rev 2.00/60.90 addr 2 > > ugen0 at uhub1 port 1 "Generic EMV Smartcard Reader" rev 2.01/1.20 addr 3 > > uvideo0 at uhub0 port 9 configuration 1 interface 0 "SunplusIT Inc > > Full HD Camera" rev 2.01/1.10 addr 4 > > video0 at uvideo0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > sd1 at scsibus4 targ 1 lun 0: > > sd1: 953609MB, 512 bytes/sector, 1952992063 sectors > > root on sd1a (81e11568a3f5b815.a) swap on sd1b dump on sd1b > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > iwx0: hw rev 0x340, fw 77.a20fb07d.0, address e0:2e:0b:92:0b:08