From: "requiem." Subject: uvideo.c Logitech QuickCam Pro5000 does not attach uvideo only uadio (7.9-current) To: tech@openbsd.org Date: Mon, 1 Jun 2026 23:11:15 +0100 Dear Tech@, I recently got a Logitech QuickCam Pro 5000 for a small project deliberately because the uvideo(4) manpage lists it as supported. For reference, `uvideo-firmware` is installed and `sysctl kern.video.record` is enabled. I have used `video(1)` successfully with cheapie USB microcopes etc. However for the Logitech QuickCam Pro 5K it seems the video device just does not attach: ``` $ tail -f /var/log/messages Jun 1 203507 r0cinante /bsd: uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 Jun 1 203507 r0cinante /bsd: uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls Jun 1 203507 r0cinante /bsd: audio1 at uaudio0 Jun 1 203507 r0cinante /bsd: ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 ``` There is no attached uvideo device. usbdevs -vvvv says, ``` addr 08: 046d:08c5 Logitech, QuickCam Pro 5000 high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192 driver: uaudio1 driver: ugen0 ``` Again, no uvideo device. As the CVS commit history for uvideo.c already mentions some issues with the QuickCam models upon the suggestion of a friend I compiled with the following quick hack made to the existing quirks: ``` Index: uvideo.c =================================================================== RCS file: /cvs/src/sys/dev/usb/uvideo.c,v diff -u -p -r1.265 uvideo.c --- uvideo.c 6 Sep 2025 13:45:41 -0000 1.265 +++ uvideo.c 1 Jun 2026 20:03:49 -0000 @@ -387,7 +387,7 @@ const struct uvideo_devs { UVIDEO_FLAG_ISIGHT_STREAM_HEADER }, { /* Incorrectly reports as bInterfaceClass=UICLASS_VENDOR */ - { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMOEM_1 }, + { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO5K_1 }, NULL, NULL, UVIDEO_FLAG_VENDOR_CLASS ``` This gets me an attaching uvideo0 device in dmesg but /dev/video still won't work because it "can't find video interface" dmesg says the following with the custom kernel: ``` uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uvideo0: can't find video interface uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls ``` And `video` still fails with, ``` $ video video: /dev/video: Device not configured ``` Just to test, I tried adding a new definition for QUICKCAMPRO5K_1 with "NULL, NULL, 0" instead of "NULL, NULL, UVIDEO_FLAG_VENDOR_CLASS" but that got me back to no video device attaching at all. So it seems to me that there is something strange going on with the QuickCam still, possibly the quirk configuration already in uvideo.c is not working somehow? But I'm afraid this is where I exhausted all knowledge available to me. Might you be able to please look at this? Dmesg.boot and output of usbdevs -vvvv for both the patched and the stock kernel (-current) attached. Yours rqm at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9 (GENERIC.MP) #445: Mon Apr 20 21:46:22 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402698240 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub2 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #419: Mon May 18 09:02:45 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 uhid at uhidev2 not configured "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 at uhub1 port 4 configuration 1 not configured uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... OpenBSD 7.9-current (GENERIC.MP) #492: Mon May 18 08:55:04 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402370560 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub2 detached sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached uhub0: device problem, disabling port 12 uhub0: device problem, disabling port 11 uhub0: device problem, disabling port 11 umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors com0: 1 silo overflow, 0 ibuf overflows com0: 6 silo overflows, 0 ibuf overflows com0: 58 silo overflows, 0 ibuf overflows com0: 60 silo overflows, 0 ibuf overflows com0: 29 silo overflows, 0 ibuf overflows com0: 8 silo overflows, 0 ibuf overflows com0: 88 silo overflows, 0 ibuf overflows com0: 89 silo overflows, 0 ibuf overflows com0: 62 silo overflows, 0 ibuf overflows syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #425: Wed May 20 21:15:59 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... done OpenBSD 7.9-current (GENERIC.MP) #498: Wed May 20 21:08:37 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402362368 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4 uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4 uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub0: device problem, disabling port 12 uhub0: port 12 reset failed umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #451: Sun May 31 17:27:17 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... done OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402411520 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 sd2 detached scsibus3 detached umass0 detached audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402382848 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 5 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub0: port 1, set config 0 at addr 4 failed uhub0: device problem, disabling port 1 uaudio0 at uhub0 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 uaudio1 at uhub1 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub1 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub1 port 2 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub1 port 2 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uhub0: device problem, disabling port 11 uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #2: Mon Jun 1 22:17:11 BST 2026 kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402378752 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uvideo0: can't find video interface uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) ---- Controller /dev/usb0: addr 01: 8086:0000 Intel, xHCI root hub super speed, self powered, config 1, rev 1.00 driver: uhub0 port 01: 0000.02a0 power Rx.detect port 02: 0000.02a0 power Rx.detect port 03: 0000.02a0 power Rx.detect port 04: 0000.02a0 power Rx.detect port 05: 0000.02a0 power Rx.detect port 06: 0000.0303 connect enabled power recovery port 07: 0000.0303 connect enabled power recovery port 08: 0000.0503 connect enabled recovery port 09: 0000.02a0 power Rx.detect port 10: 0000.02a0 power Rx.detect port 11: 0000.0503 connect enabled recovery port 12: 0000.02a0 power Rx.detect port 13: 0000.0280 power SS.disabled port 14: 0000.0280 power SS.disabled port 15: 0000.0280 power SS.disabled port 16: 0000.0280 power SS.disabled addr 02: 047d:2048 Primax, Kensington Eagle Trackball low speed, power 100 mA, config 1, rev 6.00 driver: uhidev0 addr 03: 046a:0011 Cherry Mikroschalter, product 0x0011 low speed, power 100 mA, config 1, rev 1.00 driver: uhidev1 addr 04: 0bda:5411 Generic, USB2.1 Hub high speed, self powered, config 1, rev 1.01 driver: uhub1 port 01: 0000.0100 power port 02: 0000.0100 power port 03: 0000.0100 power port 04: 0000.0103 connect enabled power port 05: 0000.0100 power addr 05: 413c:a503 Dell, Dell AC511 USB SoundBar full speed, power 200 mA, config 1, rev 1.10 driver: uaudio0 driver: uhidev2 addr 06: 046d:08c5 Logitech, QuickCam Pro 5000 high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192 driver: uvideo0 driver: uaudio1 driver: ugen0 addr 07: 0bda:0411 Generic, USB3.2 Hub super speed, self powered, config 1, rev 1.01 driver: uhub2 port 01: 0000.02a0 power Rx.detect port 02: 0000.02a0 power Rx.detect port 03: 0000.02a0 power Rx.detect port 04: 0000.02a0 power Rx.detect addr 08: 0781:5583 USB, SanDisk 3.2Gen1 super speed, power 224 mA, config 1, rev 1.00, iSerial 01015cc7bd764d26a9c9f7d499c0aebed6541eb070139ad532868c3deaa1c298c80100000000000000000000c6177188ff0f5700835581075db0e0a4 driver: umass0 ---- 0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b OpenBSD 7.9 (GENERIC.MP) #445: Mon Apr 20 21:46:22 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402698240 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub2 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5 ucom0 at uipaq0, Generic: usb0.0.0000c.0 ucom0 detached uipaq0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #419: Mon May 18 09:02:45 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 uhid at uhidev2 not configured "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 at uhub1 port 4 configuration 1 not configured uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... OpenBSD 7.9-current (GENERIC.MP) #492: Mon May 18 08:55:04 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402370560 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub2 detached sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached uhub0: device problem, disabling port 12 uhub0: device problem, disabling port 11 uhub0: device problem, disabling port 11 umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors com0: 1 silo overflow, 0 ibuf overflows com0: 6 silo overflows, 0 ibuf overflows com0: 58 silo overflows, 0 ibuf overflows com0: 60 silo overflows, 0 ibuf overflows com0: 29 silo overflows, 0 ibuf overflows com0: 8 silo overflows, 0 ibuf overflows com0: 88 silo overflows, 0 ibuf overflows com0: 89 silo overflows, 0 ibuf overflows com0: 62 silo overflows, 0 ibuf overflows syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #425: Wed May 20 21:15:59 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... done OpenBSD 7.9-current (GENERIC.MP) #498: Wed May 20 21:08:37 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402362368 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) sd2 detached scsibus3 detached umass0 detached umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.05e30745000000000903 sd2: 971MB, 512 bytes/sector, 1989792 sectors sd2 detached scsibus3 detached umass0 detached nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4 uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4 uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached uhub0: device problem, disabling port 12 uhub0: port 12 reset failed umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 audio1 detached uaudio0 detached wskbd2: disconnecting from wsdisplay0 wskbd2 detached ucc0 detached uhidev2 detached uhub1 detached syncing disks... done rebooting... OpenBSD 7.9-current (RAMDISK_CD) #451: Sun May 31 17:27:17 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 16943927296 (16158MB) avail mem = 16423981056 (15663MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 "PNP0C0E" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT33A1" at acpi0 not configured "PNP0C0C" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured cpu0: using VERW MDS workaround pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 "Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus1 at nvme0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors "Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured "Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured "Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 3840x2160, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd2 at scsibus2 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors softraid0 at root scsibus3 at softraid0: 256 targets sd3 at scsibus3 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on rd0a swap on rd0b dump on rd0b syncing disks... done OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402411520 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 sd2 detached scsibus3 detached umass0 detached audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5 syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402382848 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 5 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub0: port 1, set config 0 at addr 4 failed uhub0: device problem, disabling port 1 uaudio0 at uhub0 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio1 at uaudio0 ugen0 at uhub0 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 audio1 detached uaudio0 detached ugen0 detached uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 uaudio1 at uhub1 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub1 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub1 port 2 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub1 port 2 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uhub0: device problem, disabling port 11 uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8 syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #2: Mon Jun 1 22:17:11 BST 2026 kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402378752 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uvideo0: can't find video interface uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #3: Mon Jun 1 22:52:33 BST 2026 kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402411520 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) audio2 detached uaudio1 detached ugen0 detached uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 syncing disks... done rebooting... OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16943927296 (16158MB) avail mem = 16402403328 (15642MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries) bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023 bios0: LENOVO 10MQS4HG00 efi0 at bios0: UEFI 2.5 efi0: American Megatrends rev 0x5000c acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF! acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff ecx=77fafbbf cpu0: cpuid 6 eax=27f7 ecx=9 cpu0: cpuid 7.0 ebx=29c67af edx=bc002e00 cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f cpu0: cpuid 80000001 edx=2c100800 ecx=121 cpu0: cpuid 80000007 edx=100 cpu0: msr 10a=c04 cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0, type P mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0, type P cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu2: smt 1, core 0, package 0, type SP cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0 cpu3: smt 1, core 1, package 0, type SP ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus -1 (RP09) acpiprt5 at acpi0: bus -1 (RP10) acpiprt6 at acpi0: bus -1 (RP11) acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at acpi0: bus -1 (RP01) acpiprt10 at acpi0: bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1 (RP04) acpiprt13 at acpi0: bus -1 (RP05) acpiprt14 at acpi0: bus -1 (RP06) acpiprt15 at acpi0: bus -1 (RP07) acpiprt16 at acpi0: bus -1 (RP08) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27 at acpi0: bus -1 (RP16) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB "PNP0C14" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632 frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter: 0x00:32:0:0x03:0x00000000fe00013c frequency: 10000 acpibtn1 at acpi0: PWRB tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 "PNP0C14" at acpi0 not configured "LEN4001" at acpi0 not configured acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpipwrres21 at acpi0: WRST acpipwrres22 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 ahci0: PHY offline on port 3 ahci0: PHY offline on port 4 ahci0: PHY offline on port 5 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5002538d42eb72d5 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4 nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF scsibus2 at nvme0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: sd1: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4 uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls audio1 at uaudio0 uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 uhidev2: iclass 3/0 ucc0 at uhidev2: 3 usages, 3 keys, enum wskbd2 at ucc0 mux 1 uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls audio2 at uaudio1 ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6 uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7 umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd2 at scsibus3 targ 1 lun 0: removable serial.0781558381075db0e0a4 sd2: 29358MB, 512 bytes/sector, 60125184 sectors vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets sd3 at scsibus5 targ 1 lun 0: sd3: 476939MB, 512 bytes/sector, 976771583 sectors root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b inteldrm0: 3840x2160, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) ---- Controller /dev/usb0: addr 01: 8086:0000 Intel, xHCI root hub super speed, self powered, config 1, rev 1.00 driver: uhub0 port 01: 0000.02a0 power Rx.detect port 02: 0000.02a0 power Rx.detect port 03: 0000.02a0 power Rx.detect port 04: 0000.02a0 power Rx.detect port 05: 0000.02a0 power Rx.detect port 06: 0000.0303 connect enabled power recovery port 07: 0000.0303 connect enabled power recovery port 08: 0000.0503 connect enabled recovery port 09: 0000.02a0 power Rx.detect port 10: 0000.02a0 power Rx.detect port 11: 0000.0503 connect enabled recovery port 12: 0000.02a0 power Rx.detect port 13: 0000.0280 power SS.disabled port 14: 0000.0280 power SS.disabled port 15: 0000.0280 power SS.disabled port 16: 0000.0280 power SS.disabled addr 02: 047d:2048 Primax, Kensington Eagle Trackball low speed, power 100 mA, config 1, rev 6.00 driver: uhidev0 addr 03: 046a:0011 Cherry Mikroschalter, product 0x0011 low speed, power 100 mA, config 1, rev 1.00 driver: uhidev1 addr 04: 0bda:5411 Generic, USB2.1 Hub high speed, self powered, config 1, rev 1.01 driver: uhub1 port 01: 0000.0100 power port 02: 0000.0100 power port 03: 0000.0100 power port 04: 0000.0103 connect enabled power port 05: 0000.0100 power addr 05: 413c:a503 Dell, Dell AC511 USB SoundBar full speed, power 200 mA, config 1, rev 1.10 driver: uaudio0 driver: uhidev2 addr 06: 046d:08c5 Logitech, QuickCam Pro 5000 high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192 driver: uaudio1 driver: ugen0 addr 07: 0bda:0411 Generic, USB3.2 Hub super speed, self powered, config 1, rev 1.01 driver: uhub2 port 01: 0000.02a0 power Rx.detect port 02: 0000.02a0 power Rx.detect port 03: 0000.02a0 power Rx.detect port 04: 0000.02a0 power Rx.detect addr 08: 0781:5583 USB, SanDisk 3.2Gen1 super speed, power 224 mA, config 1, rev 1.00, iSerial 01015cc7bd764d26a9c9f7d499c0aebed6541eb070139ad532868c3deaa1c298c80100000000000000000000c6177188ff0f5700835581075db0e0a4 driver: umass0 ----