From: Jan Klemkow Subject: em(4): detect BMC network reachable To: tech@openbsd.org Date: Fri, 6 Nov 2026 12:35:40 +0100 Hi, I'm struggling in the past to shutdown interface sharing between my OpenBSD host system and the on-board BMC. There might be a away to turn this off via NVM. But, I'm not sure about how to do this yet. What helps users now, is to show them. That there BMC/IPMI is reachable via network now: # dmesg | grep ^em em0 at pci5 dev 0 function 0 "Intel I210" rev 0x03: msi, address 9c:6b:00:bf:20:e3 em0: BMC reachable via network em1 at pci6 dev 0 function 0 "Intel I210" rev 0x03: msi, address 9c:6b:00:bf:20:e4 ok? bye, jan Index: dev/pci/if_em.c =================================================================== RCS file: /cvs/src/sys/dev/pci/if_em.c,v diff -u -p -r1.384 if_em.c --- dev/pci/if_em.c 14 Aug 2026 06:40:24 -0000 1.384 +++ dev/pci/if_em.c 6 Nov 2026 10:53:19 -0000 @@ -619,6 +619,15 @@ em_attach(struct device *parent, struct printf("%s: PHY reset is blocked due to SOL/IDER session.\n", DEVNAME(sc)); + /* Indicate whether the BMC is reachable via this port */ + if (sc->hw.mac_type == em_i210 || sc->hw.mac_type == em_i350) { + uint32_t manc = E1000_READ_REG(&sc->hw, MANC); + + if (ISSET(manc, E1000_MANC_RCV_TCO_EN) && + ISSET(manc, E1000_MANC_EN_BMC2NET)) + printf("%s: BMC reachable via network\n", DEVNAME(sc)); + } + /* Identify 82544 on PCI-X */ if (sc->hw.bus_type == em_bus_type_pcix && sc->hw.mac_type == em_82544) Index: dev/pci/if_em_hw.h =================================================================== RCS file: /cvs/src/sys/dev/pci/if_em_hw.h,v diff -u -p -r1.103 if_em_hw.h --- dev/pci/if_em_hw.h 14 Aug 2026 07:21:33 -0000 1.103 +++ dev/pci/if_em_hw.h 6 Nov 2026 10:54:29 -0000 @@ -2245,6 +2245,7 @@ struct e1000_adv_tx_context_desc { #define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ #define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ #define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ +#define E1000_MANC_EN_BMC2NET 0x20000000 /* BMC gets network traffic */ #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */