From: Tom Smyth Subject: Re: em(4): detect BMC network reachable To: Jan Klemkow Cc: tech@openbsd.org Date: Fri, 6 Nov 2026 13:13:51 +0000 That is nice ... depending on the vendor, you can apply bios oand firmware to permanently disable the bmc with with afirmware update https://github.com/corna/me_cleaner/wiki/HAP-AltMeDisable-bit may be of use Hope this helps, On Fri, 6 Nov 2026 at 13:07, Jan Klemkow wrote: > > On Fri, Nov 06, 2026 at 05:44:56AM -0600, Theo de Raadt wrote: > > I would use a warning that makes people worry more, something like: > > > > %s: warning - BMC is enabled on this interface > > > > That does not tell them how to fix it, but we know that's more difficult. > > It can also be slightly untrue. The card has it's BMC decode logic enabled, but > > the BMC itself might be missing or corretcly disabled (not possible on some > > machines), but these situations cannoe be determined here. > > Your right, this diff adds an explanation of the message to manpage. > So, users have a change to do the right actions. > > ok? > > thanks, > jan > > Index: sys/dev/pci/if_em.c > =================================================================== > RCS file: /cvs/src/sys/dev/pci/if_em.c,v > diff -u -p -r1.384 if_em.c > --- sys/dev/pci/if_em.c 14 Aug 2026 06:40:24 -0000 1.384 > +++ sys/dev/pci/if_em.c 6 Nov 2026 12:23:51 -0000 > @@ -619,6 +619,16 @@ em_attach(struct device *parent, struct > printf("%s: PHY reset is blocked due to SOL/IDER session.\n", > DEVNAME(sc)); > > + /* Indicate whether the BMC is reachable via this port */ > + if (sc->hw.mac_type == em_i210 || sc->hw.mac_type == em_i350) { > + uint32_t manc = E1000_READ_REG(&sc->hw, MANC); > + > + if (ISSET(manc, E1000_MANC_RCV_TCO_EN) && > + ISSET(manc, E1000_MANC_EN_BMC2NET)) > + printf("%s: warning - BMC is enabled on this interface\n", > + DEVNAME(sc)); > + } > + > /* Identify 82544 on PCI-X */ > if (sc->hw.bus_type == em_bus_type_pcix && > sc->hw.mac_type == em_82544) > Index: sys/dev/pci/if_em_hw.h > =================================================================== > RCS file: /cvs/src/sys/dev/pci/if_em_hw.h,v > diff -u -p -r1.103 if_em_hw.h > --- sys/dev/pci/if_em_hw.h 14 Aug 2026 07:21:33 -0000 1.103 > +++ sys/dev/pci/if_em_hw.h 6 Nov 2026 12:22:13 -0000 > @@ -2245,6 +2245,7 @@ struct e1000_adv_tx_context_desc { > #define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ > #define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ > #define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ > +#define E1000_MANC_EN_BMC2NET 0x20000000 /* MC <-> network traffic */ > > #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ > #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ > Index: share/man/man4/em.4 > =================================================================== > RCS file: /cvs/src/share/man/man4/em.4,v > diff -u -p -r1.55 em.4 > --- share/man/man4/em.4 8 Sep 2021 20:29:21 -0000 1.55 > +++ share/man/man4/em.4 6 Nov 2026 12:52:35 -0000 > @@ -193,6 +193,17 @@ Only full-duplex mode is supported at th > .Pp > For more information on configuring this device, see > .Xr ifconfig 8 . > +.Sh DIAGNOSTICS > +.Bl -tag -width Ds > +.It "warning - BMC is enabled on this interface" > +.Pp > +A baseboard management controller (BMC) shares this interface with the > +host and is reachable via the connected network. > +Traffic to and from the BMC is handled by the controller's management > +firmware and is not visible to the operating system. > +Depending on the system, the BMC's network access can be disabled > +in the BIOS or BMC configuration. > +.El > .Sh SEE ALSO > .Xr arp 4 , > .Xr gcu 4 , > -- Kindest regards, Tom Smyth.