From: Yamasaki Yuu Subject: [PATCH 3/7] hvs: use 10-byte commands with the Hyper-V virtual DVD drive To: tech@openbsd.org Date: Wed, 11 Nov 2026 11:46:48 +0900 The virtual DVD drive reports ANSI version 0 in its INQUIRY data, so cd(4) treats it as a pre-SCSI-2 device and reads with READ(6). The host fails every READ(6) with SRB_STATUS_INVALID_REQUEST and CHECK CONDITION, with no sense data, so the drive can't be read. Report SCSI-2 for Microsoft CD-ROM devices, next to the existing SPC-3 fixup, so cd(4) uses READ(10). VPD pages are left alone. --- sys/dev/pv/hvs.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git sys/dev/pv/hvs.c sys/dev/pv/hvs.c index 2024adc75d6..568afb30203 100644 --- sys/dev/pv/hvs.c +++ sys/dev/pv/hvs.c @@ -613,6 +613,16 @@ fixup_inquiry(struct scsi_xfer *xs, struct hvs_srb *srb) (SID_ANSII_REV(inq) == SCSI_REV_SPC2) && !strncmp(vendor, "Msft", 4)) inq->version = SCSI_REV_SPC3; + + /* + * The virtual DVD drive reports no SCSI version, so cd(4) + * would use READ(6), which the host rejects. + */ + if (!ISSET(((struct scsi_inquiry *)&xs->cmd)->flags, + SI_EVPD) && (inq->device & SID_TYPE) == T_CDROM && + SID_ANSII_REV(inq) < SCSI_REV_2 && + !strncmp(vendor, "Msft", 4)) + inq->version = SCSI_REV_2; } }