Download raw body.
uvideo.c Logitech QuickCam Pro5000 does not attach uvideo only uadio (7.9-current)
Dear Tech@,
I recently got a Logitech QuickCam Pro 5000 for a small project
deliberately because the uvideo(4) manpage lists it as supported.
For reference, `uvideo-firmware` is installed and `sysctl
kern.video.record` is enabled. I have used `video(1)` successfully with
cheapie USB microcopes etc.
However for the Logitech QuickCam Pro 5K it seems the video device just
does not attach:
```
$ tail -f /var/log/messages
Jun 1 203507 r0cinante /bsd: uaudio0 at uhub0 port 11 configuration 1
interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4 Jun 1
203507 r0cinante /bsd: uaudio0: class v1, high-speed, sync, channels: 0
play, 1 rec, 2 ctls Jun 1 203507 r0cinante /bsd: audio1 at uaudio0 Jun
1 203507 r0cinante /bsd: ugen0 at uhub0 port 11 configuration 1
"Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
```
There is no attached uvideo device.
usbdevs -vvvv says,
```
addr 08: 046d:08c5 Logitech, QuickCam Pro 5000
high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192
driver: uaudio1
driver: ugen0
```
Again, no uvideo device.
As the CVS commit history for uvideo.c already mentions some issues
with the QuickCam models upon the suggestion of a friend I
compiled with the following quick hack made to the existing quirks:
```
Index: uvideo.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/uvideo.c,v
diff -u -p -r1.265 uvideo.c
--- uvideo.c 6 Sep 2025 13:45:41 -0000 1.265
+++ uvideo.c 1 Jun 2026 20:03:49 -0000
@@ -387,7 +387,7 @@ const struct uvideo_devs {
UVIDEO_FLAG_ISIGHT_STREAM_HEADER
},
{ /* Incorrectly reports as bInterfaceClass=UICLASS_VENDOR */
- { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMOEM_1 },
+ { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO5K_1
}, NULL,
NULL,
UVIDEO_FLAG_VENDOR_CLASS
```
This gets me an attaching uvideo0 device in dmesg but /dev/video
still won't work because it "can't find video interface"
dmesg says the following with the custom kernel:
```
uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam
Pro 5000" rev 2.00/0.05 addr 6 uvideo0: can't find video interface
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam
Pro 5000" rev 2.00/0.05 addr 6 uaudio1: class v1, high-speed, sync,
channels: 0 play, 1 rec, 2 ctls
```
And `video` still fails with,
```
$ video
video: /dev/video: Device not configured
```
Just to test, I tried adding a new definition for QUICKCAMPRO5K_1 with
"NULL, NULL, 0" instead of "NULL, NULL, UVIDEO_FLAG_VENDOR_CLASS" but
that got me back to no video device attaching at all.
So it seems to me that there is something strange going on with the
QuickCam still, possibly the quirk configuration already in uvideo.c is
not working somehow?
But I'm afraid this is where I exhausted all knowledge available to me.
Might you be able to please look at this?
Dmesg.boot and output of usbdevs -vvvv for both the patched and the
stock kernel (-current) attached.
Yours
rqm
at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9 (GENERIC.MP) #445: Mon Apr 20 21:46:22 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402698240 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub2 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #419: Mon May 18 09:02:45 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
uhid at uhidev2 not configured
"Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 at uhub1 port 4 configuration 1 not configured
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 7.9-current (GENERIC.MP) #492: Mon May 18 08:55:04 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402370560 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub2 detached
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
uhub0: device problem, disabling port 12
uhub0: device problem, disabling port 11
uhub0: device problem, disabling port 11
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
com0: 1 silo overflow, 0 ibuf overflows
com0: 6 silo overflows, 0 ibuf overflows
com0: 58 silo overflows, 0 ibuf overflows
com0: 60 silo overflows, 0 ibuf overflows
com0: 29 silo overflows, 0 ibuf overflows
com0: 8 silo overflows, 0 ibuf overflows
com0: 88 silo overflows, 0 ibuf overflows
com0: 89 silo overflows, 0 ibuf overflows
com0: 62 silo overflows, 0 ibuf overflows
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #425: Wed May 20 21:15:59 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 7.9-current (GENERIC.MP) #498: Wed May 20 21:08:37 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402362368 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information
nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information
uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4
uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4
uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub0: device problem, disabling port 12
uhub0: port 12 reset failed
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #451: Sun May 31 17:27:17 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402411520 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
sd2 detached
scsibus3 detached
umass0 detached
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402382848 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub0: port 1, set config 0 at addr 4 failed
uhub0: device problem, disabling port 1
uaudio0 at uhub0 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
uaudio1 at uhub1 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub1 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub1 port 2 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub1 port 2 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uhub0: device problem, disabling port 11
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #2: Mon Jun 1 22:17:11 BST 2026
kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402378752 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uvideo0: can't find video interface
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
----
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.02a0 power Rx.detect
port 05: 0000.02a0 power Rx.detect
port 06: 0000.0303 connect enabled power recovery
port 07: 0000.0303 connect enabled power recovery
port 08: 0000.0503 connect enabled recovery
port 09: 0000.02a0 power Rx.detect
port 10: 0000.02a0 power Rx.detect
port 11: 0000.0503 connect enabled recovery
port 12: 0000.02a0 power Rx.detect
port 13: 0000.0280 power SS.disabled
port 14: 0000.0280 power SS.disabled
port 15: 0000.0280 power SS.disabled
port 16: 0000.0280 power SS.disabled
addr 02: 047d:2048 Primax, Kensington Eagle Trackball
low speed, power 100 mA, config 1, rev 6.00
driver: uhidev0
addr 03: 046a:0011 Cherry Mikroschalter, product 0x0011
low speed, power 100 mA, config 1, rev 1.00
driver: uhidev1
addr 04: 0bda:5411 Generic, USB2.1 Hub
high speed, self powered, config 1, rev 1.01
driver: uhub1
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
port 04: 0000.0103 connect enabled power
port 05: 0000.0100 power
addr 05: 413c:a503 Dell, Dell AC511 USB SoundBar
full speed, power 200 mA, config 1, rev 1.10
driver: uaudio0
driver: uhidev2
addr 06: 046d:08c5 Logitech, QuickCam Pro 5000
high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192
driver: uvideo0
driver: uaudio1
driver: ugen0
addr 07: 0bda:0411 Generic, USB3.2 Hub
super speed, self powered, config 1, rev 1.01
driver: uhub2
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.02a0 power Rx.detect
addr 08: 0781:5583 USB, SanDisk 3.2Gen1
super speed, power 224 mA, config 1, rev 1.00, iSerial 01015cc7bd764d26a9c9f7d499c0aebed6541eb070139ad532868c3deaa1c298c80100000000000000000000c6177188ff0f5700835581075db0e0a4
driver: umass0
----
0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9-current (RAMDISK_CD) #415: Sun May 17 00:30:13 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
OpenBSD 7.9 (GENERIC.MP) #445: Mon Apr 20 21:46:22 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402698240 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub2 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uipaq0 at uhub0 port 12 configuration 1 interface 0 "Compaq iPAQ PocketPC" rev 1.00/0.00 addr 5
ucom0 at uipaq0, Generic: usb0.0.0000c.0
ucom0 detached
uipaq0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #419: Mon May 18 09:02:45 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
uhid at uhidev2 not configured
"Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5 at uhub1 port 4 configuration 1 not configured
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 7.9-current (GENERIC.MP) #492: Mon May 18 08:55:04 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402370560 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 6
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 7
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub2 detached
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
uhub0: device problem, disabling port 12
uhub0: device problem, disabling port 11
uhub0: device problem, disabling port 11
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
com0: 1 silo overflow, 0 ibuf overflows
com0: 6 silo overflows, 0 ibuf overflows
com0: 58 silo overflows, 0 ibuf overflows
com0: 60 silo overflows, 0 ibuf overflows
com0: 29 silo overflows, 0 ibuf overflows
com0: 8 silo overflows, 0 ibuf overflows
com0: 88 silo overflows, 0 ibuf overflows
com0: 89 silo overflows, 0 ibuf overflows
com0: 62 silo overflows, 0 ibuf overflows
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #425: Wed May 20 21:15:59 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 7.9-current (GENERIC.MP) #498: Wed May 20 21:08:37 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402362368 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.57 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sd2 detached
scsibus3 detached
umass0 detached
umass0 at uhub0 port 12 configuration 1 interface 0 "Genesys Logic USB Storage" rev 2.00/9.03 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, STORAGE DEVICE, 0903> removable serial.05e30745000000000903
sd2: 971MB, 512 bytes/sector, 1989792 sectors
sd2 detached
scsibus3 detached
umass0 detached
nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information
nd6_resolve: fe80:1::3003:98ff:fe94:7381: incorrect nd6 information
uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4
uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 2 "Logitech Camera" rev 1.10/1.00 addr 4
uaudio0: class v1, full-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech Camera" rev 1.10/1.00 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
nd6_resolve: fe80:1::68ae:42ff:fe27:8eb8: incorrect nd6 information
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
uhub0: device problem, disabling port 12
uhub0: port 12 reset failed
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 5
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
audio1 detached
uaudio0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhidev2 detached
uhub1 detached
syncing disks... done
rebooting...
OpenBSD 7.9-current (RAMDISK_CD) #451: Sun May 31 17:27:17 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16943927296 (16158MB)
avail mem = 16423981056 (15663MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
"Intel HD Graphics 530" rev 0x06 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus1 at nvme0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel B250 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x00 at pci0 dev 31 function 3 not configured
"Intel 200 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 7 configuration 1 interface 0 "vendor 0x046a product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402411520 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 22 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 12 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 12 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
sd2 detached
scsibus3 detached
umass0 detached
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 5
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402382848 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uaudio0 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub0: port 1, set config 0 at addr 4 failed
uhub0: device problem, disabling port 1
uaudio0 at uhub0 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio1 at uaudio0
ugen0 at uhub0 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 4
audio1 detached
uaudio0 detached
ugen0 detached
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 6
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
uaudio1 at uhub1 port 1 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub1 port 1 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub1 port 2 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub1 port 2 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uhub0: device problem, disabling port 11
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 8
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #2: Mon Jun 1 22:17:11 BST 2026
kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402378752 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uvideo0 at uhub0 port 11 configuration 1 interface 0 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uvideo0: can't find video interface
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #3: Mon Jun 1 22:52:33 BST 2026
kls@buildebeast.0xde501a7a.xyz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402411520 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
audio2 detached
uaudio1 detached
ugen0 detached
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
syncing disks... done
rebooting...
OpenBSD 7.9-current (GENERIC.MP) #541: Sun May 31 17:19:38 MDT 2026
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16943927296 (16158MB)
avail mem = 16402403328 (15642MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xd6d80000 (88 entries)
bios0: vendor LENOVO version "M1AKT59A" date 10/27/2023
bios0: LENOVO 10MQS4HG00
efi0 at bios0: UEFI 2.5
efi0: American Megatrends rev 0x5000c
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR BGRT TPM2 LUFT ASF!
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu2: smt 1, core 0, package 0, type SP
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz, 3192.56 MHz, 06-5e-03, patch 000000f0
cpu3: smt 1, core 1, package 0, type SP
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00013c
frequency: 10000
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
"PNP0C14" at acpi0 not configured
"LEN4001" at acpi0 not configured
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3100, 2800, 2700, 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN256, MVT0> naa.5002538d42eb72d5
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "Kingston", unknown product 0x501c rev 0x01: msix, NVMe 1.4
nvme0: KINGSTON SNV2S500G, firmware EJFK3N.9, serial 50026B7785A07ECF
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S50, EJFK>
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address 6c:4b:90:50:ab:63
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Primax Kensington Eagle Trackball" rev 2.00/6.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhub1 at uhub0 port 8 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/1.01 addr 4
uaudio0 at uhub1 port 4 configuration 1 interface 1 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 6 ctls
audio1 at uaudio0
uhidev2 at uhub1 port 4 configuration 1 interface 3 "Dell Dell AC511 USB SoundBar" rev 1.10/1.10 addr 5
uhidev2: iclass 3/0
ucc0 at uhidev2: 3 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uaudio1 at uhub0 port 11 configuration 1 interface 3 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uaudio1: class v1, high-speed, sync, channels: 0 play, 1 rec, 2 ctls
audio2 at uaudio1
ugen0 at uhub0 port 11 configuration 1 "Logitech QuickCam Pro 5000" rev 2.00/0.05 addr 6
uhub2 at uhub0 port 20 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/1.01 addr 7
umass0 at uhub0 port 21 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.0781558381075db0e0a4
sd2: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 476939MB, 512 bytes/sector, 976771583 sectors
root on sd3a (fb15fe7179880757.a) swap on sd3b dump on sd3b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
----
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.02a0 power Rx.detect
port 05: 0000.02a0 power Rx.detect
port 06: 0000.0303 connect enabled power recovery
port 07: 0000.0303 connect enabled power recovery
port 08: 0000.0503 connect enabled recovery
port 09: 0000.02a0 power Rx.detect
port 10: 0000.02a0 power Rx.detect
port 11: 0000.0503 connect enabled recovery
port 12: 0000.02a0 power Rx.detect
port 13: 0000.0280 power SS.disabled
port 14: 0000.0280 power SS.disabled
port 15: 0000.0280 power SS.disabled
port 16: 0000.0280 power SS.disabled
addr 02: 047d:2048 Primax, Kensington Eagle Trackball
low speed, power 100 mA, config 1, rev 6.00
driver: uhidev0
addr 03: 046a:0011 Cherry Mikroschalter, product 0x0011
low speed, power 100 mA, config 1, rev 1.00
driver: uhidev1
addr 04: 0bda:5411 Generic, USB2.1 Hub
high speed, self powered, config 1, rev 1.01
driver: uhub1
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
port 04: 0000.0103 connect enabled power
port 05: 0000.0100 power
addr 05: 413c:a503 Dell, Dell AC511 USB SoundBar
full speed, power 200 mA, config 1, rev 1.10
driver: uaudio0
driver: uhidev2
addr 06: 046d:08c5 Logitech, QuickCam Pro 5000
high speed, power 500 mA, config 1, rev 0.05, iSerial 0EE65192
driver: uaudio1
driver: ugen0
addr 07: 0bda:0411 Generic, USB3.2 Hub
super speed, self powered, config 1, rev 1.01
driver: uhub2
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.02a0 power Rx.detect
addr 08: 0781:5583 USB, SanDisk 3.2Gen1
super speed, power 224 mA, config 1, rev 1.00, iSerial 01015cc7bd764d26a9c9f7d499c0aebed6541eb070139ad532868c3deaa1c298c80100000000000000000000c6177188ff0f5700835581075db0e0a4
driver: umass0
----
uvideo.c Logitech QuickCam Pro5000 does not attach uvideo only uadio (7.9-current)